Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Appendices
- Back Page
Picture settings – Color
Picture adjustments
Brightness (0...255)
Adjust the brightness with the slider from 0 to 255.
Contrast (0...255)
Adjust the contrast with the slider from 0 to 255.
Saturation (0...255)
Adjust the color saturation with the slider from 0 to 255.
White balance
– Basic auto mode allows the camera to continually adjust
for optimal color reproduction using an average reflectance
method. This is useful for indoor light sources and for
colored LED light illumination.
– Standard auto mode allows the camera to continually
adjust for optimal color reproduction in an environment
with natural light sources.
– Sodium vapor auto mode allows the camera to continually
adjust for optimal color reproduction in an environment
with sodium vapor light sources (street lighting).
– Dominant color auto mode takes into account any
dominant color in the image (for example, the green of a
football pitch or of a gaming table) and uses this
information to obtain a well balanced color reproduction.
– In Manual mode the Red, Green, and Blue gain can be
manually set to a desired position.
Hold
Click Hold to put ATW on hold and save the current color
settings. The mode changes to manual.
6.4
6.4.1
6.4.2
40 en | Camera
Camera Browser
Interface
2016.09 | v1.632 | AM18-Q0718 Bosch Security Systems