Operation Manual

Fixed exposure
Select to set a fixed shutter speed.
4 Select the shutter speed for fixed exposure. (The values
available depend on the value set for the ALC mode.)
Day/night
Auto - the camera switches the IR cut-off filter on and off
depending on the scene illumination level.
Monochrome - the IR cut-off filter is removed, giving full IR
sensitivity.
Color - the camera always produces a color signal regardless of
light levels.
Day-to-night switchover
Adjust the slider to set the video level at which the camera in
Auto mode switches from color to monochrome operation (-15
to +15).
A low (negative) value means that the camera switches to
monochrome at a lower light level. A high (positive) value means
that the camera switches to monochrome at a higher light level.
Night-to-day switchover
Adjust the slider to set the video level at which the camera in
Auto mode switches from monochrome to color operation (-15
to +15).
A low (negative) value means that the camera switches to color
at a lower light level. A high (positive) value means that the
camera switches to color at a higher light level.
(The actual switch-over point might change automatically to
avoid instable switching.)
Note:
To ensure stability when using IR illuminators, use the alarm
interface for reliable Day/Night switching.
6.5.6
Camera Browser
Interface
Camera | en 43
Bosch Security Systems 2016.09 | v1.632 | AM18-Q0718