Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Appendices
- Back Page
Encoder Streams
H.264 settings
Select H.264 Settings
1. Select a codec algorithm Property for stream 1 from the
drop-down box.
2. Select the Non-recording profile for stream 1 from the
eight profiles that have been defined.
– This profile is not used for recording. When a stream is
used for recording, the profile selected on the
Recording Profiles page is used.
3. Select a codec algorithm Property for stream 2 (the
available choices depend on the algorithm selected for
stream 1).
4. Select the Non-recording profile for stream 2 from the
eight profiles that have been defined.
– This profile is not used for recording. When a stream is
used for recording, the profile selected on the
Recording Profiles page is used.
JPEG stream
Set the parameters for the M‑JPEG stream.
– Select the Resolution.
– Select the Max. frame rate in images per second (ips).
– The Picture quality slider allows adjustment of the M‑JPEG
image quality from Low to High.
Note:
The M-JPEG frame rate can vary depending on system loading.
7.3
7.3.1
7.3.2
56 en | Encoder Settings
Camera Browser
Interface
2016.09 | v1.632 | AM18-Q0718 Bosch Security Systems