Operation Manual

Encoder Regions
Encoder regions are used to increase or decrease the encoding
quality for selectable areas of the image. They can be used to
give better control of the bitrate by enhancing the encoding
quality of important regions (objects) and decreasing the
encoding quality of less important regions (background).
Eight encoder regions can be defined:
1. Select one of the eight available regions from the drop-
down box.
2. Click the + box to add an area.
3. Use the mouse to define the area covered by the region.
– Drag the center, corner points, or sides of the shaded
area.
– Double-click on a side to add additional points to the
area.
4. Select the encoder quality to be used for the defined area.
(Object and background quality levels are defined in the
Expert Settings section of the Encoder Profile page.)
5. If required, select another region and repeat the steps.
6. To remove a region, select the area and click the waste bin
icon.
7. Click Set to apply the region settings.
7.4
Camera Browser
Interface
Encoder Settings | en 57
Bosch Security Systems 2016.09 | v1.632 | AM18-Q0718