Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Appendices
- Back Page
Storage Management
Device manager
The Device manager indicates if storage is controlled locally or
by a VRM system.
An external Video Recording Manager (VRM) system for the unit
is configured via the Configuration Manager.
Recording media
Select a media tab to connect to the available storage media.
iSCSI Media
To use an iSCSI system as the storage medium, a connection to
the desired iSCSI system is required to set the configuration
parameters.
The storage system selected must be available on the network
and completely set up. It must have an IP address and be
divided into logical drives (LUNs).
1. Enter the IP address of the required iSCSI destination in
the iSCSI IP address field.
2. If the iSCSI destination is password protected, enter the
password into the Password field.
3. Click Read.
– The connection to the IP address is established.
The Storage overview field displays the logical drives.
Local Media
An SD card inserted in the camera can be used for local
recording (not available on some cameras).
– To use the SD card for ANR, check the box.
– If the SD card is password protected, enter the password
into the Password field.
The Storage overview field displays the local media.
8.2
8.2.1
8.2.2
Camera Browser
Interface
Recording | en 59
Bosch Security Systems 2016.09 | v1.632 | AM18-Q0718