Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Appendices
- Back Page
Recording Profiles
A recording profile contains the characteristics of the tracks that
are used for recording. These characteristics can be defined for
ten different profiles. The profiles can then be assigned to days
or times of day on the Recording Scheduler page.
Each profile is color-coded. The names of the profiles can be
changed on the Recording Scheduler page.
To configure a profile click its tab to open its settings page.
– To copy the currently visible settings to other profiles, click
Copy Settings. A window opens to select the target profiles
for the copied settings.
– If you change a profile’s settings, click Set to save.
– If necessary, click Default to return all settings to their
factory defaults.
Stream profile settings
Select the encoder profile setting that is to be used with stream
1 and 2 when recording. This selection is independent of the
selection for live stream transmission. (The properties of the
encoder profiles are defined on the Encoder Profile page.)
Select the ROI pre-position scene that is to be used for
recording. (The ROI pre-positions for stream 2 are configured on
the Live page.)
Recording track selection
Standard and alarm recording can be defined for the two
recording tracks. You must first select the track before setting
up the standard and alarm recording parameters.
1. Click the Recording 1 entry in the list.
2. Set up the standard and alarm recording parameters for
track 1 as described below.
3. Click the Recording 2 entry in the list.
8.3
8.3.1
62 en | Recording
Camera Browser
Interface
2016.09 | v1.632 | AM18-Q0718 Bosch Security Systems