Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Appendices
- Back Page
Decoder
If a split image is set for the selected video output, select a
decoder to display the alarm image. The decoder selected
determines the position in the split image.
SSL encryption
SSL encryption protects data used for establishing a
connection, such as the password. By selecting On, only
encrypted ports are available for the Remote port parameter.
SSL encryption must be activated and configured on both sides
of a connection.
The appropriate certificates must also have been uploaded.
(Certificates can be uploaded on the Maintenance page.)
Configure and activate encryption for media data (such as video,
metadata or audio when available) on the Encryption page
(encryption is only available if the appropriate license is
installed).
Auto-connect
Select On to automatically re-establish a connection to one of
the previously specified IP addresses after each reboot,
connection breakdown, or network failure.
Audio
Select On to transmit the audio stream with an alarm
connection.
9.1.9
9.1.10
9.1.11
9.1.12
70 en | Alarm
Camera Browser
Interface
2016.09 | v1.632 | AM18-Q0718 Bosch Security Systems