Operation Manual

9.4.1 Send alarm e-mail 73
9.4.2 Mail server IP address 73
9.4.3 SMTP user name 73
9.4.4 SMTP password 73
9.4.5 Format 73
9.4.6 Image size 73
9.4.7 Attach JPEG from camera 74
9.4.8 Destination address 74
9.4.9 Sender name 74
9.4.10 Test e-mail 74
9.5 Alarm Task Editor 75
10
Setting up VCA 76
10.1 VCA - Silent VCA 76
10.2 VCA - Profiles 76
10.2.1 Aggregation time [s] 76
10.2.2 Analysis type 77
10.2.3 Tamper detection 77
10.3 VCA - Scheduled 81
10.3.1 Weekdays 81
10.3.2 Holidays 81
10.4 VCA - Event triggered 83
10.4.1 Trigger 83
10.4.2 Trigger active 83
10.4.3 Trigger inactive 83
10.4.4 Delay [s] 83
11
Interfaces 84
11.1 Alarm input 84
11.1.1 Name 84
11.1.2 Action 84
11.2 Alarm output 85
11.2.1 Idle state 85
11.2.2 Operating mode 85
11.2.3 Output follows 85
11.2.4 Output name 85
11.2.5 Toggle output 85
8 en | Table of Contents
Camera Browser
Interface
2016.09 | v1.632 | AM18-Q0718 Bosch Security Systems