Operation Manual

DynDNS
Enable DynDNS
A dynamic Domain Name Service (DNS) allows you to select the
unit via the Internet using a host name, without having to know
the current IP address of the unit. You can enable this service
here. To do this, you must have an account with one of the
dynamic DNS providers and you must register the required host
name for the unit on that site.
Note:
For information about the service, registration process and
available host names refer to the provider.
Provider
Select your dynamic DNS Provider from the drop-down list.
Host name
Enter the host name registered for the unit.
User name
Enter the user name you registered.
Password
Enter the password you registered.
Force registration now
Force the registration by transferring the IP address to the
DynDNS server. Entries that change frequently are not provided
in the Domain Name System. It is a good idea to force the
registration when setting up the device for the first time. Only
use this function when necessary and no more than once a day,
to avoid the possibility of being blocked by the service provider.
To transfer the IP address of the device, click the Register
button.
12.2
12.2.1
12.2.2
12.2.3
12.2.4
12.2.5
12.2.6
Camera Browser
Interface
Network | en 91
Bosch Security Systems 2016.09 | v1.632 | AM18-Q0718