Owner's Manual

11
Operation
Main power switch
Use the main switch to turn on the electronic circuitry for
the control panel. The cooktop is now ready to use.
Turning the cooktop on
Touch the On/Off touch key. A beep will sound. The
ü
indicator located on top of the On/Off touch key lights
up.
Turning the cooktop off
Touch the On/Off touch key. The
ü indicator goes out.
The cooktop is switched off. The residual heat indicators
will remain on until the elements have cooled off
sufficiently.
Note: The cooktop switches off automatically when all
the elements have been switched off for more than
20 seconds.
The residual heat indicator remains lit until the elements
have cooled down sufficiently.
•/œ is displayed next to
the corresponding element symbol.
Setting the cooktop
This section will show you how to set the elements. The
table contains details on the heat settings for a variety of
dishes.
Setting the element
Select the desired heat level using the touch keys +
and -.
Heat level 1 = minimum power
Heat level 9 = maximum power
Each heat level has an intermediate level. This level is
displayed as a dot.
Selecting the heat level
The cooktop must be turned on.
1. Touch the + or - key of the desired element and its
display lights up
‹.
2. In the following 10 seconds, touch the + or - key. The
default settings appear.
+ touch key = power level 9
- touch key = power level 4
3. To change the power level, touch the + or - key until
the desired power level is displayed.
Note: The selected power level will flash if no pan is
placed on the induction element. After a certain time, the
element turns itself off.
Turning off the element
Touch the + or - key until
‹ appears. The element turns
off and the residual heat indicator is displayed.
Notes
▯ If there is no cookware on the induction burner, the
heat setting display blinks. After a while, the cooking
zone will switch itself off.
▯ Steht vor dem Einschalten des Kochfeldes ein
Kochgeschirr auf der Kochstelle, wird dieses
spätestens 20 Sekunden nach dem Berühren des
Hauptschalters erkannt und die Kochstelle wird
automatisch ausgewählt. Stellen Sie in den nächsten
20 Sekunden die Kochstufe ein. Andernfalls schaltet
sich die Kochstelle wieder aus.
Even if there are several pots and pans on the cooktop
when it is switched on, only one piece of cookware is
detected.
 
%RRVW%RRVW