Installation Guide
9
Check the Installation
9 CAUTION
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the OFF
position.
Remove everything from the cooktop surface including
stickers. Clean cooktop surface with cooktop cleaning
creme.
Switch on the circuit breaker.
Verify that elements function properly.
Technical service
Contact our Technical Service Department if your
appliance needs repair. Our central Customer Service
Center (see below) will also be happy to supply you with
details on a center close to you.
E number and FD number
When you contact our service, please have the Model (E)
number and the FD number for your appliance available.
You can find the identification plate with these numbers:
▯ in the appliance booklet
▯ on the underside of the appliance
You can also find the E number on the glass ceramic of
your cooktop. You can check the Customer Service
Index (TK) and the FD number in the basic settings.
Please refer to the section on “Basis Settings” in your
Use and Care manual.
Please note that a visit from an after-sales service
engineer is not free of charge in the event of faulty
operation of the appliance caused by the customer, even
during the warranty period.
You can rely on the manufacturer’s expertise. Rest
assured that the repair will be handled by trained service
technicians who have the original replacement parts for
your appliance.
Please find the contact data of all countries in the
enclosed customer service list.
0DLQ6WUHHW6XLWH
,UYLQH&$
ZZZERVFKKRPHFRP