Use and Care Manual

10
Getting familiar with the appliance
In this section we describe the control panel, elements
and displays.
These instructions apply to more than one cooktop, your
appliance might vary slightly.
Control panel
Touch control zone
When you touch a symbol, the corresponding function
will be activated.
Notes
▯ When you touch several symbols at once the settings
will not change. This enables you to clean the touch
contol zone when food has spilled over.
▯ Always keep the touch control zone clean and dry.
Moisture and dirt can affect proper functioning.
The elements
Residual heat indicator
The cooktop has a residual heat indicator for each
element. This indicates that an element is still hot. Do not
touch an element while the residual heat indicator is lit
up.
The following are shown depending on the amount of
residual heat:
▯ Display •: High temperature
▯ Display œ: Low temperature
If you remove the cookware from the element during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the element is switched off, the residual heat
indicator will light up. Even after the cooktop has been
switched off, the residual heat indicator will stay lit for as
long as the element is still warm.
Touch keys
On/Off Main switch
$
Select cooking element
0 1 û 2 û ... 8 û 9
Settings area
Panel Lock Child safety panel lock /
Wipe protection
Speed Boost
SpeedBoost
®
function
Auto Chef
AutoChef
®
frying function
Timer Timer functions
min / low / med
/ max
Select power level for AutoChef
®
Display icons
‹
Cooktop ready
Ú
Indicated function active
x
Cook time set
A
Indicates selected element
‹‹
Timer value
‚-Š
Power level
•/œ
Residual heat
›
SpeedBoost
®
function
‘
AutoChef
®
function
min Time display
s
AutoChef
®
temperature
max, med,
low, min
Temperature settings
V min
Timer function
Display icons
Element
$
Single element Always use cookware of a suitable size.
Use only cookware suitable for induction cooking; see the section ~ "Cooking with Induction"