Manual

Alarm mode stamping
Select On in the drop-down box for a text message to be
displayed in the event of an alarm. It can be displayed at a
position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y
position fields.
Alarm message
Enter the message to be displayed on the image in the event of
an alarm. The maximum text length is 31 characters.
Transparent background
Check this box to make the stamp on the image transparent.
Video authentication
Select a method for verifying the integrity of the video in the
Video authentication drop-down box.
If you select Watermarking all images are marked with an icon.
The icon indicates if the sequence (live or saved) has been
manipulated.
If you want to add a digital signature to the transmitted video
images to ensure their integrity, select one of the cryptographic
algorithms for this signature.
Enter the interval (in seconds) between insertions of the digital
signature.
GB/T 28181
This page allows you to set the parameters for conformance to
the GB/T 28181 national standard “Security and protection
video monitoring network system for information transport,
switch and control”. This standard is specifically for China.
4.4.5
4.4.6
4.4.7
4.4.8
4.5
26 en | General settings
Camera Browser
Interface
2015.06 | v1.610 | AM18-Q0691 Bosch Security Systems