Installation Manual

Option A: Mount Phantom Edge in a horizontal direction using sticker
c.
Mount Phantom Edge in a horizontal
direction by using adhesive surface
of the stickers. Ensure mounting
surface is cleaned using Iso-Propyl
alcohol before sticking the device.
PHANTOM
EDGE
Discover the World of AIoT
CT
Connection
3.2 Mounting
Peel off the other liner of double
sided tape from the backside of
Phantom Edge
b.
8
Clean the backside of the device
using Iso-Propyl alcohol, peel off the
liner from one side of double sided
tape and stick it to the backside of
Phantom Edge as shown above.
Ensure there are no air bubbles while
sticking.
a.
Identify a flat painted wall or metallic surface to mount Phantom Edge. Ensure
that Phantom Edge is mounted within 1 meter of radius from the point of CT
installation. Phantom Edge can be mounted in the following options: