OBJ_BUCH-500-001.book Page 1 Monday, November 5, 2007 9:05 AM Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen www.bosch-pt.com PEX 220 A 1 609 929 M15 (2007.
OBJ_BUCH-500-001.book Page 3 Monday, November 5, 2007 8:33 AM |3 1 2 3 4 Bosch Power Tools 1 609 929 M15 | (5.11.
OBJ_BUCH-500-001.book Page 4 Monday, November 5, 2007 8:33 AM 4| A2 A1 6 1 2 5 2 2 A3 A4 7 2 B C Ø 19 mm 3 9 2 608 601 175 8 5 4 1 609 929 M15 | (5.11.
OBJ_BUCH-500-001.book Page 14 Monday, November 5, 2007 8:33 AM 14 | English General Power Tool Safety Warnings en Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
OBJ_BUCH-500-001.book Page 15 Monday, November 5, 2007 8:33 AM English | 15 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Machine-specific Safety Warnings f Use the machine only for dry sanding. Penetration of water into the machine increases the risk of an electric shock. b) Do not use the power tool if the switch does not turn it on and off.
OBJ_BUCH-500-001.book Page 16 Monday, November 5, 2007 8:33 AM 16 | English Product Features The numbering of the product features refers to the illustration of the machine on the graphics page. 1 On/Off switch 2 Dust box, complete (micro filtersystem) 3 Sanding plate 4 Sanding sheet* 5 Extraction outlet 6 Latching lever for dust box 7 Filter element (micro filtersystem) 8 Screws for sanding plate 9 Extraction adapter* *The accessories illustrated or described are not included as standard delivery.
OBJ_BUCH-500-001.book Page 17 Monday, November 5, 2007 8:33 AM English | 17 Assembly f Before any work on the machine itself, pull the mains plug. Selecting the Sanding Sheet Depending on the material to be worked and the required rate of material removal, different sanding sheets are available: Material – – – – Paint Varnish Filling compound Filler red:Wood – All wooden materials (e.g.
OBJ_BUCH-500-001.book Page 18 Monday, November 5, 2007 8:33 AM 18 | English Replacing the Sanding Plate (see figure B) Note: Replace a damaged sanding plate 3 immediately. Pull off the sanding sheet. Unscrew the four screws 8 completely and remove the sanding plate 3. Attach the new sanding plate 3 and tighten the screws again. Dust/Chip Extraction f Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health.
OBJ_BUCH-500-001.book Page 19 Monday, November 5, 2007 8:33 AM English | 19 Sanding Plate Brake Fine Sanding An integrated sanding plate brake reduces the stroke rate when running at no-load so that scoring is prevented when placing the machine onto the workpiece. Attach a sanding sheet with fine grain. By lightly varying the application pressure, the sanding plate stroke rate can be reduced whereby the orbital action is maintained.
OBJ_BUCH-500-001.book Page 20 Monday, November 5, 2007 8:33 AM 20 | English WARNING! Important instructions for connecting a new 3-pin plug to the 2-wire cable. The wires in the cable are coloured according to the following code: Do not connect the blue or brown wire to the earth terminal of the plug. Important: If for any reason the moulded plug is removed from the cable of this power tool, it must be disposed of safely.
