Use and Care Manual
Table Of Contents
- Induction hob
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Suitable cookware
- 5 Familiarising yourself with your appliance
- 6 Before using for the first time
- 7 Software update
- 8 Basic operation
- 9 Favourite button
- 10 FlexInduction
- 11 Time-setting options
- 12 PowerBoost
- 13 PanBoost
- 14 Keep-warm function
- 15 Transfer settings
- 16 PerfectFry Sensor
- 17 Childproof lock
- 18 Pause
- 19 Individual safety switch-off
- 20 Basic settings
- 21 Cookware test
- 22 Home Connect
- 23 Hob-based hood control
- 24 Cleaning and servicing
- 25 Troubleshooting
- 26 Disposal
- 27 Customer Service
- 28 Information regarding Free and Open Source Software
- 29 Declaration of Conformity
- 30 Test dishes
- 30.1 Melting the chocolate coating
- 30.2 Heating and keeping lentil stew warm
- 30.3 Heating and keeping lentil stew warm
- 30.4 Béchamel sauce
- 30.5 Cooking rice pudding with the lid on
- 30.6 Cooking rice pudding without a lid
- 30.7 Cooking rice
- 30.8 Roasting a pork loin
- 30.9 Preparing crêpes
- 30.10 Deep-fat frying frozen chips
en PowerBoost
12
Switching on Timer
Requirement:Assign the function to .
1.
Press .
2.
Select the required time.
a The time starts to elapse.
a A signal tone sounds and the displays flash once
the time has elapsed.
Changing or switching off the Timer
1.
Press .
2.
To switch off the function, change the cooking time
or set it to .
PowerBoost
12 PowerBoost
The PowerBoost function enables you to heat up large
quantities of water faster than when using .
This function is available for all cooking zones,
provided the other cooking zone on the same side is
not in use. Otherwise, and flash on the display for
the selected cooking zone. is then set automatically
without activating the function.
12.1 Switching on PowerBoost
1.
Select the cooking zone.
2.
Touch
a The display lights up.
a The function is activated.
Note:You can also switch on this function when cook-
ing with a connected FlexZone.
12.2 Switching off PowerBoost
1.
Select the cooking zone.
2.
Touch .
a The display goes out and the cooking zone
switches back to power level
a The function is switched off.
Note:In certain circumstances, the appliance switches
this function off to protect the electronic elements in-
side the hob.
PanBoost
13 PanBoost
1
You can use this function to heat up pans more quickly
than with . Do not use the PowerBoost function with
frying pans – this may damage the coating.
You can activate the function via Home Connect or Fa-
vourite button.
This function is available for all cooking zones,
provided the other cooking zone on the same side is
not in use. Otherwise, and flash on the display for
the selected cooking zone. then switches on auto-
matically.
13.1 Recommended applications
¡ Do not place a lid on the pan.
¡ Never leave pans unattended when they are heating
up.
¡ Only use cold pans.
¡ Use pans with a completely flat base. Do not use
pans with a thin base.
13.2 Switching on PanBoost
Requirement:Assign the function to .
→"Favourite button", Page10.
1.
Select the cooking zone.
2.
Touch .
a lights up.
a The function is activated.
Note:You can also switch on this function when cook-
ing with a connected FlexZone.
13.3 Switching off PanBoost
1.
Select the cooking zone.
2.
Select the power level.
a goes out
a The function is switched off.
Note:To avoid high temperatures, this function auto-
matically switches itself off after 30 seconds.
Keep-warm function
14 Keep-warm function
1
You can use this function to melt chocolate or butter,
and to keep meals warm.
You can activate the function via Home Connect or Fa-
vourite button.
1
Available depending on software version. Further information on availability can be found on the website.