Operation Manual

English - 1
The numbering of the device elements refers to
the illustration of the machine on the graphics
page.
1 Gear selector
2 Torque setting ring
3 Keyless chuck
4 Auxiliary handle
(PSB 18 VE-2/PSB 24 VE-2)
5 Battery
6 Screwdriver bit magazine
7 Screwdriver bit*
8 Rotational direction switch
9 On/Off switch
10 Battery unlocking button
11 Screwdriver attachment (bit)*
12 Universal bit holder*
13 Allen key*
14 Locking screw
* Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 60 745.
Typically the A-weighted sound pressure level of
the product is less than 70 dB (A).
The noise level when working can exceed
85 dB (A).
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s
2
.
The machine is intended for screwing in and loos-
ening screws, for drilling in wood, metal, ceramic
and plastic and for impact drilling in brick, con-
crete and stone.
Tool Specifications
Cordless impact drill and
screwdriver
PSB 12 VE-2 PSB 14,4 VE-2 PSB 18 VE-2 PSB 24 VE-2
Order number 0 603 941 5.. 0 603 941 4.. 0 603 941 3.. 0 603 941 2..
No-load speed
1st gear [rpm] 0 – 400 0 – 400 0 – 450 0 – 500
2nd gear [rpm] 0–1 500 0–1 500 0–1 600 0–1 800
max. torque, soft screwdriving
application according to
ISO 5393
[Nm] 18 20 23 30
Maximum drilling Ø
Steel [mm] 12 12 13 13
Wood [mm] 20 25 28 30
Brickwork [mm] 10 10 14 15
Screw diameter, max. [mm] 6 8 8 8
Chuck clamping range [mm] 1–10 1–10 1–10 1–13
Drill spindle thread 1/2 " 1/2 " 1/2 " 1/2 "
Weight with battery, approx. [kg] 2.1 2.2 2.3 2.7
Battery NiCd NiCd NiCd NiCd
Temperature control NTC NTC NTC NTC
Rated voltage [V=] 12 14.4 18 24
Capacity [Ah] 1.5 1.5 1.5 1.5
Weight, approx. [kg] 0.6 0.7 0.8 1.1
Please observe the order number of your machine. The trade names of the individual machines may vary.
Machine Elements Noise/Vibration Information
Intended Use
9 • 2 609 932 336 • TMS • 26.01.04