Operation Manual

English - 1
The numbering of the machine elements refers to
the illustration of the machine on the graphics
page.
1 Keyless chuck
2 Spindle lock button
3 Wing bolt for auxiliary handle adjustment
4 “Drilling/Impact Drilling” selector switch
5 Soft grip
6 Lock-on button for On/Off switch
7 On/Off switch
8 Rotational direction switch
9 Auxiliary handle
10 Extraction device with dust collector and
depth stop*
11 Telescopic guide with depth stop scale*
12 Sleeve for adjustment of the depth stop*
13 Pushbutton for removal of the dust collector*
14 Dust collector*
15 Thumbwheel for speed preselection
(PSB 650 RA)
16 Dust protection ring*
17 Locking latch for dust collector*
18 Pushbutton for disassembly of the extraction
device*
19 Filter element with holder*
20 Level indicator of the dust collector*
21 Screwdriver bit*
22 Universal bit holder*
23 Allen key*
* Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 60 745.
Typically the A-weighted noise levels of the ma-
chine are: sound pressure level 97 dB (A); sound
power level 108 dB (A). Measurement
uncertainty K = 3 dB.
Wear hearing protection!
The typically weighted acceleration is 16 m/s
2
.
Tool Specifications
Impact Drill PSB 550 RA PSB 650 RA
Article number 3 603 C97 4.. 3 603 C85 7..
Rated power input [W] 550 650
No-load speed [rpm] 0–3 000 0–3 000
Impact rate, max. [bpm] 48 000 48 000
Rated torque [Nm] 1.5 2.0
Torque, max. [Nm] 7.5 8.0
Speed Preselection – ●
Constant Electronic Control – –
Right/Left rotation ● ●
Keyless Chuck ● ●
Spindle lock (Press+Lock) ● ●
Chuck clamping range [mm] 1.5 – 13 1.5 – 13
Maximum drilling Ø
Concrete [mm] 13 16
Brickwork [mm] 15 18
Steel [mm] 10 12
Wood [mm] 20 30
with extraction device mounted [mm] 13 13
Weight according to EPTA-Procedure 01/2003
with extraction device [kg] 2.0 2.0
without extraction device [kg] 1.8 1.8
Protection class / II / II
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these
values can vary.
Machine Elements
Noise/Vibration Information
2 609 001 316.book Seite 1 Dienstag, 19. Juli 2005 12:49 12
10 • 2 609 001 316 • TMS • 08.07.05