Technical data

18 | English
2 609 003 396 | (5.12.08) Bosch Power Tools
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 70 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
a
h
=2.5 m/s
2
, Uncertainty K =1.0 m/s
2
,
Screwdriving: Vibration emission value
a
h
=2.5 m/s
2
, Uncertainty K =1.0 m/s
2
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Cordless Drill/Driver PSR 14,4 LI-2 PSR 18 LI-2
Article number
3 603 J56 4.. 3 603 J56 3..
Rated voltage
V= 14.4 18
No-load speed
– 1st gear
– 2nd gear
min
-1
min
-1
0–370
0–1150
0–400
0–1250
Max. torque for hard/soft screwdriving application
according to ISO 5393
Nm 38/20 46/25
Max. screw dia.
mm 8 8
Max. drilling dia.
– Steel
– Wood
mm
mm
10
30
10
35
Chuck clamping range
mm 0–10 0–10
Weight according to EPTA-Procedure 01/2003
kg 1.35 1.45
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
OBJ_BUCH-900-001.book Page 18 Friday, December 5, 2008 9:09 AM