Installation guide

80 en | RPS Setup and Maintenance RPS
4998141259 | 09 | 2008.10 Installation Guide Bosch Security Systems, Inc.
4. Click Modify, and then click Next. The Select Features dialog opens.
Figure 6.3 Select Features Window
5. Select the checkboxes for the features you want to install, or clear the checkboxes for
the features you want to remove.
6. Click Next. The selected features are either installed or uninstalled as selected.
7. When the Install Complete dialog opens, click Finish to end the RPS Setup Maintenance
process.
6.2 Repairing RPS
To reinstall all of the program features installed during the previous setup:
1. Select Start > Settings > Control Panel > Add/Remove Programs. The Add/Remove
Programs dialog opens. Refer to Figure 6.1.
2. Scroll down the list until you see RPS. Click RPS to select it.
3. Click Change/Remove. The RPS Setup Maintenance dialog opens. Refer to Figure 6.2.
4. Click Repair, and then click Next. A progress indicator dialog opens. When the repair is
complete, the Install Complete dialog opens.
5. Click Finish to end the RPS Setup Maintenance process.
6.3 Removing RPS
To remove RPS and all of its features:
1. Select Start > Settings > Control Panel > Add/Remove Programs. The Add/Remove
Programs dialog opens. Refer to Figure 6.1.
2. Scroll down the list until you see RPS. Click RPS to select it.
3. Click Change/Remove. The RPS Setup Maintenance dialog opens. Refer to Figure 6.2.
4. Click Remove, and then click Next.
5. When the Confirm Uninstall dialog opens, click Yes. A progress dialog opens.
6. When the removal process is complete, restart the PC.
i
NOTICE!
To repair the current RPS installation, you must use the original installation files.
– If RPS was installed from the CD-ROM, you must use the CD-ROM.
– If RPS was installed from a folder containing the installation files, you must use the same
folder in the location it resided at when RPS was installed.