User`s guide

19
Viewing Alarm Memory
After an alarm has been silenced and cleared from the display, you may still
review the points that had been in alarm.
1. Ensure the system is turned off (On light is off).
2. Press the [4] key. The following display shows that there are alarms
in memory:
ALARM MEMORY
HOLD 6 TO VIEW
3. Press the [6] key to view those points which were in alarm. This
display shows that there was an alarm on point 8:
ALARM PT 8
BEDROOM WINDOW
4. If you entered your passcode before the system dialed your alarm
company, the display shows:
CANCELED PT 8
BEDROOM WINDOW
5. Continue to hold the [6] key to view all points that were in alarm.
When the last alarm has been shown, the display shows:
TO CLEAR MEMORY
TURN SYSTEM ON
6. Turn the system on again to clear alarm memory.