User`s guide

Changing Passcodes

I have this feature.

I do not have this feature.

This feature lets you change your personal passcode at any time, without

assistance from your alarm company. It is recommended that you write

down your old passcode and the new one before you begin.

1. Make sure your system is off (On light is off).

2. Press the [5] key. The OK tone sounds and the display changes to:

ENTER OLD CODE

3. Enter your current passcode. As you enter digits, the display shows:

ENTER CODE

∗∗∗

4. If the passcode you entered is valid, you are prompted to enter your

new passcode:

ENTER NEW CODE

5. Enter a new passcode with the same number of digits as your old

passcode. If the error tone sounds, try a different new passcode.

ENTER CODE

∗∗∗

6. If you entered a valid new passcode, the display changes to:

ENTER NEW AGAIN

7. Enter your new passcode again. As you enter digits, the display

shows:

ENTER CODE

∗∗∗

8. The display shows the following to confirm the change, and leaves

the change passcode mode. If the error tone sounds, start over:

CODE CHANGED