User`s guide

Exit Only

I have this feature.

I do not have this feature.

The Exit Only feature allows you to exit the premises when the system is All

or Part On with No Delay. After exit delay expires, the door is returned to

the system so that opening the door causes an alarm.

You may, for example, use the Exit Only feature when you are going out

but your family is staying home, saving you the trouble of having to turn

the system off and then on again.

1. The system must be All or Part On with No Delay.

ALL ON NO DELAY

SYSTEM OK

2. Press the [CLEAR] key. The exit delay tone starts, and the display

shows the following:

30 SEC TO EXIT!

TO STOP

PRESS CLEAR

3. Leave through the designated entry/exit delay door. After exit delay

expires, the door is returned to the system.