User`s guide

Change Other Users’ Passcodes

I have this feature.

I do not have this feature.

This feature allows those with Owner type passcodes to change the

passcodes of system users.

1. Make sure the system is turned off (On light is off).

2. Press the [6] key and enter your passcode (Owner type required).

The display scrolls the following:

PUSH 9 TO RENEW

ALL ONE-TIME

PUSH 1 TO CHANGE

CODE TYPES

PUSH 0 TO CHANGE

CODES

PUSH CLEAR

TO EXIT

3. Press [0] to change passcodes. The display shows:

SELECT CODE

(1 TO 8)

4. Enter the number of the user whose passcode you want to change

(1 to 8). The display shows:

ENTER NEW CODE

5. Enter a new passcode with the same number of digits.

6. The OK tone sounds (if the error tone sounds, try a different

passcode). The system asks you to enter the new passcode again:

ENTER NEW AGAIN

7. If the change was successful, the following display is shown. If the

error tone sounds, return to step 3. Be sure to enter the same

passcode in steps 5 and 6.

CODE CHANGED