Use and Care Manual
Table Of Contents
- Dishwasher
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Dishwasher Cycles
- 6 Options
- 7 Features
- 8 Before using for the first time
- 9 Water softening system
- 10 Rinse aid system
- 11 Detergent
- 12 Dishware
- 13 Basic Operation
- 13.1 Protection against unintentional operation
- 13.2 Switching on the appliance
- 13.3 Setting a cycle
- 13.4 Setting options
- 13.5 Setting the electronic delay time
- 13.6 Starting the wash cycle
- 13.7 Activating the button lock
- 13.8 Deactivating the button lock
- 13.9 Interrupting the wash cycle
- 13.10 Terminating the wash cycle
- 13.11 Switching off the appliance
- 14 Basic settings
- 15 Home Connect®
- 16 Cleaning and maintenance
- 17 Troubleshooting
- 18 Transportation, storage and disposal
- 19 Customer Service
- 20 Technical specifications
- 21 STATEMENT OF LIMITED PRODUCT WARRANTY
Basic Operation en-us
29
The program is saved and the
appliance switches off.
2. Press On/Off.
3. Press to resume the wash
cycle.
13.10 Terminating the
wash cycle
To end a cycle early or to switch
from one that has already started,
you will need to cancel it first.
▶ Press for approx.
4seconds.
a All displays light up.
a As soon as the displays are off,
the display shows "0h:01m"
and the residual water is
pumped out.
a The cycle is cancelled and
ends after approx. 1minute.
13.11 Switching off the
appliance
CAUTION
To avoid risk of injury, always use
caution when opening the door
during or following a wash cycle
as hot water or steam may es-
cape.
▶ Do not fully open the door until
water noises have stopped and
steam has subsided.
1. Please note the information on
Preventing Material Damage
→
Page9
.
2. Press On/Off.