Use and Care Manual

Troubleshooting en-us
47
Issue Cause and troubleshooting
WLAN display is
flashing.
Connection to home network is not available.
▶ Activate the wireless network connection on
your router.
Home Connect can-
not be implemented
correctly.
Home Connect set incorrectly.
▶ Please consult the documents supplied for
HomeConnect®.
There is a technical error.
▶ Please consult the information on support in
the documents supplied for HomeConnect®.
Special salt refill in-
dicator lights up.
Insufficient special salt.
▶ Add Special salt.
Sensor does not detect special salt tablets.
▶ Do not use special salt tablets.
Refill indicator for
special salt does not
light up.
Water softening system is switched off.
▶ Set the water softening system.
→ "Setting the water softening system",
Page19
Refill indicator for
rinse aid lights up.
No rinse aid.
1.
Add Rinse aid → Page21 .
2. Set the amount of rinse aid to be dispensed.
→ "Setting the amount of rinse aid", Page21
Refill indicator for
rinse aid does not
light up.
Rinse aid system is switched off.
▶ Set the amount of rinse aid.
→ "Setting the amount of rinse aid", Page21
Display flashes. Appliance door is not closed properly.
▶ Close the appliance door.
‒ Arrange the dishware so that no parts
project beyond the rack and prevent the ap-
pliance door from closing properly.