Register yo new devic ur e on MyBosch now and get free b enefits: bosch-h ome.
en Table of contents Safety ............................................... 4 General information.......................... 4 Intended use..................................... 4 Restriction on user group................. 4 Safe installation ................................ 4 Safe use ........................................... 6 Damaged appliance ......................... 7 Risk to children ................................ 8 Preventing material damage ........ 10 Safe installation .........................
en Terminate programme.................... 33 Switching off appliance .................. 33 Basic settings................................ 34 Overview of basic settings ............. 34 Changing basic settings................. 35 Cleaning and servicing ................. 35 Cleaning the tub ............................. 35 Cleaning products .......................... 35 Tips on appliance care................... 35 Machine Care .......................... 35 Filter system ...................................
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡ For cleaning household tableware. ¡ In private households and in enclosed spaces in a domestic environment. ¡ Up to an altitude of 4000 m above sea level.
Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing. ▶ The protective conductor system of the domestic electrical installation must be properly installed.
en Safety WARNING ‒ Risk of burns! If the appliance is not installed properly, this may result in burns. ▶ With free-standing appliances, ensure that they are installed with the back panel against a wall. Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health.
Safety en WARNING ‒ Risk of scalding! If you open the appliance door while the programme is running, hot water may splash out of the appliance. ▶ Open the appliance door carefully if the programme is still running. WARNING ‒ Risk of tipping! Overfilling the Baskets may cause the appliance to tip up. ▶ Never overfill the Baskets with free-standing appliances. WARNING ‒ Risk of electric shock! ¡ An ingress of moisture can cause an electric shock. ▶ Only use the appliance in enclosed spaces.
en Safety ¡ Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his Customer Service. Risk to children WARNING ‒ Risk of suffocation! ¡ Children may put packaging material over their heads or wrap themselves up in it and suffocate.
Safety en WARNING ‒ Risk of chemical burns! Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes. ▶ Keep children away from detergent and rinse aid products. ▶ Keep children away from the appliance when open. The water in the interior of the dishwasher is not drinking water. It may contain residues of detergents and rinse aid. WARNING ‒ Risk of injury! Children may get their fingers caught in the slots of the tablet collecting tray and injure themselves.
en Preventing material damage Preventing material damage Preventing material damage Preventing material damage Safe installation ATTENTION! ¡ Improper installation of the appliance may cause damage. ▶ If the dishwasher is installed above or below other domestic appliances, follow the information on installation in combination with a dishwasher in the installation instructions for the individual appliances.
Environmental protection and saving energy ¡ Unsuitable cleaning agents may damage the appliance. ▶ Do not use a steam cleaner. ▶ So as not to scratch the finish on the appliance, do not use sponges with a rough surface or abrasive cleaning agents. ▶ To prevent corrosion, do not use sponge cloths on dishwashers with a stainless steel front or rinse such cloths thoroughly several times before using them for the first time.
en Installation and connection Note: The appliance has been tested at the factory to check it is in working order. It is possible that water has left marks on the appliance. These marks will disappear after the first wash cycle.
Installation and connection en Electrical connection Connecting the appliance to the electricity supply Notes ¡ Please follow the "Safety instructions" → Page 4. ¡ Connect the appliance to alternating current only, in the range of 220 - 240 V and 50 Hz or 60 Hz. ¡ Please note that the water safety system is only functional if there is a power supply. 1. Insert the non-heating appliance plug of the power cable into the appliance. 2. Insert the mains plug of the appliance into a nearby socket.
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. 8 7 9 6 10 5 4 11 3 12 2 1 1 1 14 Rating plate Depending on the appliance specifications Rating plate with "E number and FD number" → Page 53. The data you need for "Customer Service" → Page 52.
Familiarising yourself with your appliance 2 Detergent dispenser 3 4 Bottom basket 5 Lower spray arm 6 Tablet collecting tray Dispenser for special salt 7 8 9 10 Top basket 11 12 Filter system 1 Cutlery drawer 1 en "Detergent" → Page 27 is added to the detergent dispenser. "Bottom basket" → Page 20 Add special salt to the dispenser for special salt. → "Water softening system", Page 23 The lower spray arm washes the tableware in the bottom basket.
en Familiarising yourself with your appliance 1 2 3 4 12 11 10 7 8 9 "Switching on the appliance" → Page 31 "Switching off the appliance" → Page 33 "Terminating the programme" → Page 33 "Programmes" → Page 17 1 ON/OFF button 2 3 Programme button 4 Rinse aid refill indicator 5 6 7 Water supply display Water softening system → "Adding special salt", Page 24 Rinse aid system → "Adding rinse aid", Page 26 Display for water supply Timer programming "Setting timer programming" → Page 32 8 9 S
Programmes en Programmes Programmes You can find an overview of the programmes that can be selected here. Different programmes, which can be found on the control panel of your appliance, are available depending on the appliance configuration. The running time may vary depending on the programme selected. The running time depends on the water temperature, the quantity of tableware, the level of soiling and the additional function selected.
en Additional functions Programme: Silence 50° Express 65° - 1h Machine Care Use Programme sequence Tableware: ¡ Cleaning mixed tableware and cutlery. Level of soiling: ¡ Removing common household food remnants lightly dried-on. Tableware: ¡ Cleaning mixed tableware and cutlery. Level of soiling: ¡ Removing common household food remnants lightly dried-on. Use only if appliance is unloaded.
Features Additional func- Use tion ¡ Switch on with small loads. Half Load ¡ It is recommended adding less detergent to the detergent dispenser than for a full machine load. ¡ The run time is shortened. ¡ Energy and water consumption are reduced. ¡ For a better drying result the final rinse temExtra Dry perature is increased and the drying phase extended. ¡ Especially suitable for drying plastic parts. ¡ There is a slight increase in energy consumption and the run time is extended.
en Features 4. Raise or lower the basket evenly to the right level. Check that the basket is level on both sides. 5. Release the levers. a The basket clicks into position. 6. Slide the basket back in. Cutlery drawer Arrange cutlery in the cutlery drawer. Bottom basket Arrange pans and plates in the bottom basket. Arrange cutlery with the points and sharp edges downwards. Large plates up to a diameter of 31 cm can be arranged in the bottom basket as shown.
Features Etagere Use the cutlery shelf and space underneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. 1. Push the lever forwards down the prongs en and fold . 1 2 2. To use the prongs again, fold them back up. a The prongs audibly click into position. If you do not need the cutlery shelf, you can fold it up. Baking sheet spray head Folding prongs Use the baking sheet spray head to clean large items of tableware, e.g.
en Features Inserting baking sheet spray head Use the baking sheet spray head instead of the top basket to clean large trays, grilles and plates. 1. Remove top basket. 2. Insert the baking sheet spray head in the holder and turn to the right . Removing baking sheet spray head If you no longer require the baking sheet spray head, remove it from the appliance. 1. Turn the baking sheet spray head anticlockwise and remove from the holder. 2. Insert the top basket in the appliance.
Before using for the first time Before using for the first time Before using for the first time 7. Start the Programme with the highest cleaning temperature without tableware. To remove any marks from water or other residues, we recommend you operate the appliance without tableware before using it for the first time. Before using for the first time Performing the initial configuration On initial start-up or after a reset to the factory settings, you will need to make settings.
en Water softening system Note: Set the water hardness determined on your appliance. → "Setting the water softening system", Page 24 With a water hardness of 0 - 8 °E you can dispense with special salt for dishwashers and switch off the water softening system. → "Switching off the water softening system", Page 25 Setting the water softening system Set the water hardness on your appliance. 1. Determine the water hardness and the appropriate setting value. → "Overview of water hardness settings", Page 23 2.
Water softening system en Switching off the water softening system Regeneration of the water softening system If you find the special salt refill indicator irritating, e.g. when using combined detergents with salt replacement substances, you can switch the indicator off. Note In order to obtain fault-free function of the water softening system, the appliance performs regeneration of the water softening system at regular intervals.
en Rinse aid system 4. Close the lid of the dispenser for Rinse aid system Rinse aid system rinse aid. a The lid clicks into position. Rinse aid system Rinse aid For optimum drying results, use rinse aid. Only use rinse aid for domestic dishwashers. Adding rinse aid If the rinse aid refill indicator lights up, top up with rinse aid. Only use rinse aid for domestic dishwashers. 1. Press the catch on the lid of the dispenser for rinse aid and lift . 2 1 2. Add rinse aid up to the max mark.
Detergent a The display shows Hxx. a The display shows . 3. Press repeatedly until the display shows the value set at the factory r05. 4. Press repeatedly until the display shows r00. 5. To save the settings, press for 3 seconds. a The rinse aid system is switched off and the rinse aid refill indicator is deactivated. Detergent Detergent Detergent Suitable detergents Only use detergents that are suitable for dishwashers. Both separate and combined detergents are suitable.
en Detergent Combined detergent Besides conventional separate detergents, a number of products are available with additional functions. These products contain not only detergent but also rinse aid and salt replacement substances (3in1) and, depending on the combination (4in1, 5in1, ...), additional components such as glass protection or stainless steel cleaner. According to manufacturers, combined detergents generally only function up to a water hardness of 26 °E.
Tableware 2. Add the detergent to the dry deter- en 3. Close the lid of the detergent dis- gent dispenser. penser. 50 ml 25 ml 15 ml If you are using tablets, one is enough. Insert the tablets in a horizontal position. If you are using powder or liquid detergent, follow the manufacturer's instructions and quantities for dosage in the detergent dispenser. 20 ml – 25 ml detergent is sufficient for normal soiling.
en Tableware Damage to glass and tableware Only put glasses and china in the dishwasher if it is marked as dishwasher-safe by the manufacturer. Avoid damage to glass and tableware.
Basic operation To save resources, do not prerinse tableware under running water. 2. Observe the following when arranging tableware: – Put heavily soiled tableware in the bottom basket, e.g. pans. The more powerful the spray jet, the better the dishwashing result will be. – To prevent damage to tableware, arrange it so it is stable and cannot tip over. – To prevent injury, arrange cutlery with the points and sharp edges facing down.
en Basic operation Setting a programme Starting the programme To adjust the wash cycle to the soiling level of the tableware, select a suitable programme. ▶ Press the programme button repeatedly until the right programme has been selected. → "Programmes", Page 17 a The programme is set and the LED flashes. a The remaining running time of the programme appears on the display. ▶ Press . a The programme has ended when the display shows "0h:00m".
Basic operation en few minutes and then close it. This will help prevent excess pressure building up in the appliance and stop the appliance door bursting open. 1. Press . a The programme is saved and the appliance switches off. 2. Press to resume the programme. Terminate programme To end a programme early or to switch from a programme that has already started, you will need to cancel it first. ▶ Press for approx. 4 seconds. a All displays light up.
en Basic settings Basic settings Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance.
Cleaning and servicing en Changing basic settings 2. Add detergent to the detergent dis- 1. Press . 2. To open the basic settings, press 3. Select the programme with the for 3 seconds. a The display shows Hxx. a The display shows . 3. Press repeatedly until the display shows the required setting. 4. Press repeatedly until the display shows the right value. You can change several settings. 5. To save the settings, press for 3 seconds.
en Cleaning and servicing Tip: You can get our tested and approved Dishwasher Care and Machine Cleaner for Dishwashers online at https://www.bosch-home.com/ store or from customer service. Phase 1 Removal of Grease and limescale 2 Food remnants and deposits Detergent Liquid machine care product or machine descaler in powder form. Machine cleaner To ensure optimum cleaning performance, the programme doses the detergents independently of each another during the relevant cleaning phase.
Cleaning and servicing en 3. Pull down the micro filter to re- Filter system The filter system removes coarse soiling from the dishwashing cycle. move. 3 2 1 1 2 3 4. Press the locking catches together and lift the coarse filter out . Micro filter Fine filter 2 Coarse filter Cleaning filters Soiling in the dishwashing water may block the filters. 1. After each wash check the filters for residue. 2. Turn the coarse filter anticlockwise and remove the filter system .
en Cleaning and servicing 7. Insert the filter system into the ap- pliance and turn the coarse filter clockwise. ‒ Make sure that the arrow markings match up. 2. Pull up the lower spray arm to re- move. 3. Check the outlet nozzles on the Cleaning spray arms Limescale and soiling in the dishwashing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. 1. Unscrew the upper spray arm and pull down to remove .
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. Troubleshooting WARNING Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance.
en Troubleshooting Fault E:32-00 will light up alternately or indicator for water supply lights up. Cause Troubleshooting 5. Remove the filter from the supply hose 6. Clean the filter. 7. Re-insert the filter in the supply hose. 8. Screw the water connection back on. 9. Check the water connection for leaks. 10. Restore the power supply. 11. Switch the appliance on. E:34-00 will light up alternately. Water is continuously running into the appliance. 1. Turn off the water tap. 2.
Troubleshooting Fault E:90-01 will light up alternately. Cause Mains voltage is too low. E:92-40 will light up alternately. Filters are soiled or blocked. ▶ Clean the filters. → "Cleaning filters", Page 37 A different error code apA technical fault is present. pears in the display window. E:01-00 to E:90-10 en Troubleshooting This is not a fault on the appliance. 1. Contact an electrician. 2. Have the mains voltage and electrical installation checked by an electrician. 1. Press . 2.
en Troubleshooting Fault Tableware is not dry. Cause Troubleshooting Water collects in recesses of ▶ Position tableware at an angle the tableware or cutlery. where possible. The combined detergent used has a poor drying performance. 1. Use rinse aid to improve drying per- formance. 2. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- ▶ Activate Extra Dry. prove drying performance. Tableware removed too 1. Wait until the programme ends.
Troubleshooting Fault Remnants of food on tableware. en Cause Tableware is placed too close together or basket is overfilled. Troubleshooting 1. Arrange tableware with sufficient space in between. The spray jets must reach the surfaces of the tableware. 2. Avoid points of contact. Spray arm rotation is blocked. ▶ Arrange tableware so that it does Spray arm nozzles are blocked. Filters are soiled. ▶ Clean the "Spray arms" → Page 38. Filters are inserted incorrectly and/or not engaged. 1.
en Troubleshooting Fault Detergent residue in the appliance Water marks on plastic parts. Cause Tabs are used in the quick or short programme. Dissolving time of the tab is not attained. Washing effect and dissolving performance are reduced after a prolonged storage time or detergent is very lumpy. Due to laws of physics droplet formation on plastic surfaces is unavoidable. After drying water marks are visible.
Troubleshooting Fault Cause Stubborn white coatings are Too little detergent is being present on tableware, inside used. the appliance or the door. Washing programme selected too weak. Tea residue or lipstick marks Washing temperature is too on tableware. low. Too little detergent is being used or is unsuitable. en Troubleshooting ▶ Increase the amount of detergent used or change "Detergent " → Page 27. ▶ Select a more intensive washing programme.
en Troubleshooting Fault Coloured deposits (yellow, orange, brown) that are easy to remove are present inside the appliance (mainly at the bottom). Cause Troubleshooting The formation of films is due 1. Check the setting of the water to ingredients of food remsoftening system. nants and tap water (limes- 2. Add special salt. cale) "soaplike". → "Adding special salt", Page 24 3. If you are using combined detergents (tabs), activate the water softening system. Follow the information about detergents.
Troubleshooting Fault Irreversible clouding of glassware. en Cause Troubleshooting Glasses are not dishwasher- ▶ Use dishwasher-proof glasses. proof, only suitable for dishGlasses are usually only suitable for washers. use in a dishwasher, i.e. long-term wear or long-term changes must be expected. ▶ Avoid a lengthy steam phase (standing time after wash cycle ends). ▶ Use a programme with a lower tem- perature. → "Programmes", Page 17 ▶ Set the softening system to the wa- ter hardness.
en Troubleshooting Information on display panel Fault Special salt refill indicator lights up. Cause Insufficient special salt. Troubleshooting ▶ Add "Special salt" → Page 24. Refill indicator for special salt does not light up. Refill indicator for rinse aid lights up. Sensor does not detect spe- ▶ Do not use special salt tablets. cial salt tablets. Water softening system is ▶ Setting the water softening system switched off. Insufficient rinse aid. 1. Add "Rinse aid" → Page 26. 2.
Troubleshooting Fault Appliance does not start. Programme starts automatically. Appliance stops during the programme or cuts out. Cause en Troubleshooting 2. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Appliance door is not closed ▶ Close the appliance door. properly. You did not wait until pro▶ → "Terminate programme", gramme ended. Page 33 Appliance door is not closed ▶ Close the appliance door. properly. Power and/or water supply 1.
en Troubleshooting Mechanical damage Fault Appliance door cannot be closed. Lid on the detergent dispenser cannot be closed. Cause Door lock has been activated. Troubleshooting ▶ Close the appliance door with greater force. Door cannot be closed due to installation method. ▶ Check whether the appliance has Detergent dispenser or lid are blocked by sticky detergent residue. ▶ Remove detergent residue. been installed properly.
Transportation, storage and disposal Clean wastewater pump 8. Insert the pump cover down Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. WARNING Risk of injury! Sharp and pointed objects or fragments of glass may block the waste water pump and cause injury. ▶ Remove any foreign bodies carefully. 1. Disconnect the appliance from the power supply. 2.
en Customer Service Transporting the appliance 1. Unplug the appliance from the To avoid damage to the appliance, empty it before transporting. Note: Always transport the dishwasher upright to prevent residual water getting into the machine's controls and damaging the appliance. 1. Remove tableware from the appliance. 2. Secure loose parts. 3. Turn on the water tap. 4. "Switch on the appliance." → Page 31 5. Select the programme with the highest temperature. → "Programmes", Page 17 6.
Technical specifications en The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website. Product number (E-Nr.), production number (FD) and consecutive numbering (Z-Nr.) You can find the product number (ENr.), the production number (FD) and the consecutive numbering (Z-Nr.) on the appliance's rating plate. The rating plate is located inside the appliance door.
en Technical specifications purchase or at least as long as we offer support and spare parts for the relevant appliance.
Thank you for buying a Bosch Home Appliance! Register your new device on MyBosch now and profit directly from: • • • • • Expert tips & tricks for your appliance Warranty extension options Discounts for accessories & spare-parts Digital manual and all appliance data at hand Easy access to Bosch Home Appliances Service Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You'll find it here.
