de Gebrauchsanleitung
de Inhaltsverzeichnis Sicherheitshinweise . . . . . . . . . . . . Gerät kennen lernen . . . . . . . . . . . Enthärtungsanlage . . . . . . . . . . . . Spezialsalz einfüllen . . . . . . . . . . . Klarspüler einfüllen . . . . . . . . . . . . Geschirr . . . . . . . . . . . . . . . . . . . . . . Reiniger . . . . . . . . . . . . . . . . . . . . . . auto 3in1 . . . . . . . . . . . . . . . . . . . . . Programmübersicht . . . . . . . . . . . . 4 6 7 8 9 10 13 14 16 Geschirrspülen . . . . . . . . . . . . . . . .
de Sicherheitshinweise Bei der Anlieferung Überprüfen Sie Verpackung und Geschirrspüler sofort auf Transportschäden. Nehmen Sie ein beschädigtes Gerät nicht in Betrieb, sondern halten Sie Rücksprache mit Ihrem Lieferanten. Entsorgen Sie das Verpackungsmaterial bitte ordnungsgemäß. Bei der Installation Nehmen Sie Aufstellung und Anschluss nach der Installations– und Montageanweisung vor. Bei der Installation muss der Geschirrspüler vom Netz getrennt sein.
de Bei Kindern im Haushalt Nutzen Sie, falls vorhanden,die Kindersicherung. Eine genaue Beschreibung finden Sie hinten im Umschlag Erlauben Sie Kindern nicht, mit dem Gerät zu spielen oder es zu bedienen. Halten Sie Kinder von Reiniger und Klarspüler fern. Diese können Verätzungen in Mund, Rachen und Augen verursachen oder zum Ersticken führen. Halten Sie Kinder vom geöffneten Geschirrspüler fern, es könnten sich noch Reste von Reiniger darin befinden.
de Gerät kennen lernen Die Abbildungen der Bedienblende und des Geräteinnenraumes befinden sich vorne im Umschlag. Auf die einzelnen Positionen wird im Text verwiesen.
de Enthärtungsanlage Für gute Spülergebnisse benötigt der Geschirrspüler weiches, d.h. kalkarmes Wasser, ansonsten lagern sich weiße Kalkrückstände auf Geschirr und Innenbehälter ab. Leitungswasser oberhalb eines bestimmten Wasserhärtegrades muss für den Betrieb im Geschirrspüler enthärtet, d.h. entkalkt werden. Dies geschieht mit Hilfe von Spezialsalz in der Enthärtungsanlage des Geschirrspülers. Die Einstellung und damit die benötigte Salzmenge ist abhängig vom Härtegrad Ihres Leitungswassers.
de Spezialsalz einfüllen Das Salznachfüllen muss immer unmittelbar vor dem Einschalten des Gerätes erfolgen. So wird erreicht, dass übergelaufene Salzlösung sofort ausgespült wird und keine Korrosion am Spülbehälter auftreten kann. Öffnen Sie den Schraubverschluss des Vorratsbehälters 27 . Gießen Sie vor der ersten Inbetriebnahme ca. 1 Liter Wasser in den Salzbehälter. Füllen Sie dann soviel Salz nach, (kein Speisesalz) bis der Salzbehälter voll ist (max. 1,5 kg).
de Klarspüler einfüllen Der Klarspüler wird für fleckenloses Geschirr und klare Gläser benötigt. Verwenden Sie nur Klarspüler für Haushaltsgeschirrspüler. Deckel des Vorratsbehälters für Klarspüler 30 aufklappen. Drücken Sie hierzu auf die Markierung (1 ) auf dem Deckel und heben Sie den Deckel gleichzeitig an der Bedienlasche (2 ) an. Zugabemenge für Klarspüler einstellen Die Klarspülerzugabemenge ist stufenlos einstellbar. Der Klarspülerregler wurde werkseitig auf 4 eingestellt.
de Geschirr Nicht geeignet Besteck– und Geschirrteile aus Holz. Empfindliche Dekorgläser, kunstgewerbliches und antikes Geschirr. Diese Dekore sind nicht spülmaschinenfest. Heißwasserempfindliche Kunststoffteile. Kupfer– und Zinngeschirr. Geschirrteile, die mit Asche, Wachs, Schmierfett oder Farbe verunreinigt sind. Materialien, die sich voll saugen, wie Schwämme und Tücher. Aufglasdekore, Aluminium– und Silberteile können beim Spülen zum Verfärben und Verblassen neigen. Auch einige Glassorten (wie z.B.
de Töpfe Unterer Geschirrkorb Etagere * 26 Besteck Bestecke sollten Sie immer unsortiert mit der Essfläche nach unten einordnen. Der Sprühstrahl erreicht so die einzelnen Teile besser. Um Verletzungen zu vermeiden, legen Sie lange, spitze Teile und Messer auf die Etagere (bei einigen Modellen) oder auf die Messerablage (als Zubehör erhältlich). * bei einigen Modellen Langstielige und hohe Gläser am Rand der Etagere (nicht gegen Geschirr) anlehnen.
de Korbhöhe verstellen * * bei einigen Modellen Der obere Geschirrkorb kann nach Bedarf in der Höhe verstellt werden, um entweder im Ober– oder Unterkorb mehr Platz für höhere Geschirrteile zu schaffen. Gerätehöhe in cm 81 86 max. ø in cm oben 20/25* 20/25* max. ø in cm unten 30/25* 34/29* Oberkorb mit seitlichen Hebeln (Rackmatic) Ziehen Sie den Oberkorb heraus. Zum Absenken drücken Sie nacheinander die beiden Hebel links und rechts auf der Korbaußenseite nach innen.
de Reiniger Sie können die im Handel befindlichen flüssigen oder pulverförmigen Markenreiniger für Geschirrspüler bzw. TABS verwenden (kein Handspülmittel!). Bei der Verwendung phosphatfreier Reiniger kann es bei hartem Leitungswasser leichter zu weißen Ablagerungen auf Geschirr und Behälterwänden kommen. Abhilfe bringt die Zugabe einer größeren Reinigermenge. Ob ein Reiniger für Silberteile geeignet ist, finden Sie auf der Packung des Reinigers.
de auto 3in1 Die Verwendung von sogenannten kombinierten Reinigerprodukten kann den Einsatz von Klarspüler und/oder Salz überflüssig machen. Derzeit sind verschiedene Arten kombinierter Reinigerprodukte erhältlich. 2in1: Sie enthalten Reiniger und Klarspüler oder Salzfunktion. 3in1: Sie enthalten Reiniger, Klarspüler und Salzfunktion. 4in1: Sie enthalten Reiniger, Klarspüler, Salzfunktion und eine zusätzliche Glasschutz–Komponente.
de Klarspülernachfüllanzeige ausund einschalten Sie können die Klarspülernachfüllanzeige 8 ein- oder ausschalten. Diese Funktion kann wie folgt geändert werden. Programmtaste 3 gedrückt halten und Hauptschalter 1 solange drücken bis die Ziffernanzeige leuchtet, anschließend Tasten loslassen. In der Ziffernanzeige 4 erscheint (Klarspülernachfüllanzeige ein). Durch drücken der Programmtaste 3 können Sie die Klarspüleranzeige aus- oder einschalten .
de Programmübersicht In dieser Übersicht ist die max. mögliche Programmanzahl dargestellt. Die entsprechenden Programme Ihres Gerätes entnehmen Sie bitte Ihrer Bedienblende. Art der Speisereste z.B.
de Geschirrspülen Spartipp Bei wenig beladener Maschine genügt häufig das nächstschwächere Programm. Programmdaten Die Programmdaten finden Sie in der Kurzanleitung. Sie beziehen sich auf Normalbedingungen. Durch: unterschiedliche Geschirrmenge Zulauftemperatur des Wassers Wasserleitungsdruck Umgebungstemperatur Netzspannungstoleranzen und den maschinenbedingten Toleranzen (z.B. Temperatur, Wassermenge, ...) können größere Abweichungen auftreten.
de Programmende Das Programmende wird durch einen Summton akustisch angezeigt. Diese Funktion kann wie folgt geändert werden: Funktionstaste C gedrückt halten und Hauptschalter 1 einschalten, dann Tasten loslassen. Die Funktionstaste C blinkt, und in der Ziffernanzeige leuchtet der werkseitig eingestellte Wert (halblaut). Um die Einstellung zu verändern: Funktionstaste C drücken.
de Programmwechsel Nach dem Einschalten ist innerhalb von 2 Min. ein Programmwechsel möglich. Bei einem späteren Programmwechsel werden bereits angefangene Programmabschnitte (z.B. Reinigen) zu Ende geführt. Die neue Restzeit setzt sich aus der Restzeit des vorangegangenen Programmabschnittes und der Restzeit des neu gewählten Programmes zusammen. Intensivtrocknung Im Klarspülen wird mit einer höheren Temperatur gearbeitet und damit ein verbessertes Trocknungsergebnis erreicht.
de Wartung und Pflege Regelmäßige Kontrolle und Wartung Ihrer Maschine hilft Fehler zu vermeiden. Dies spart Zeit und Ärger. Gesamtzustand der Maschine Spülraum auf Ablagerungen von Fett und Kalk überprüfen. Finden sich solche Ablagerungen, dann: Reinigerkammer mit Reiniger befüllen. Gerät ohne Geschirr im Programm mit höchster Spültemperatur starten. Zur Gerätereinigung nur speziell für Geschirrspüler geeignete Reiniger/Gerätereiniger verwenden. Türdichtung regelmäßig mit einem feuchten Tuch abwischen.
de Sprüharme Kalk und Verunreinigungen aus dem Spülwasser können Düsen und Lagerungen der Sprüharme 22 und blockieren. Abwasserpumpe * * bei einigen Modellen 24 Austrittsdüsen der Sprüharme auf Verstopfungen durch Speisereste kontrollieren. Gegebenenfalls den unteren Sprüharm 24 nach oben abziehen. Oberen Sprüharm 22 abschrauben. Sprüharme unter fließendem Wasser reinigen. Sprüharme wieder einrasten bzw. festschrauben.
de Innenraum auf Fremdkörper kontrollieren und gegebenenfalls Fremdkörper entfernen. Abdeckung wieder einsetzen. Siebe wieder einsetzen und verschrauben. click Fehlersuche Kleine Fehler selbst beheben Erfahrungsgemäß lassen sich die meisten Fehler, die im täglichen Betrieb auftreten, von Ihnen selbst beheben, ohne dass Sie den Kundendienst rufen müssen. Dies erspart natürlich Kosten und stellt sicher, dass die Maschine schnell wieder zur Verfügung steht.
de ... beim Einschalten Das Gerät läuft nicht an. Sicherung im Haus nicht in Ordnung. Gerätestecker nicht eingesteckt. Gerätetür nicht richtig geschlossen. Wasserhahn nicht geöffnet. Sieb am Wasserzulaufschlauch verstopft. Gerät ausschalten und Gerätestecker ziehen. Wasserhahn zudrehen. Danach das Sieb, das sich am Anschluss des Zulaufschlauchs befindet, säubern. Zum Schluss Stromversorgung wiederherstellen, Wasserhahn öffnen und Gerät einschalten. ... am Gerät Unterer Sprüharm dreht sich schwer.
de ... beim Spülen Ungewöhnliche Schaumbildung Handspülmittel im Vorratsbehälter für Klarspüler. Verschütteter Klarspüler kann beim nächsten Spülgang zu übermäßiger Schaumbildung führen, deshalb danebengelaufenes Klarspülmittel mit einem Lappen entfernen. Gerät bleibt während des Spülens stehen. Stromzufuhr unterbrochen. Wasserzulauf unterbrochen. Funktion “RESET” ausführen. Schlagendes Geräusch beim Spülen Sprüharm schlägt an Geschirrteile.
de Geschirr wird nicht trocken. Gerätetür zu früh geöffnet und Geschirr zu früh ausgeräumt. Programm ohne Trocknung gewählt. Klarspülerzugabemenge auf einen zu geringen Wert eingestellt. Gläser bekommen stumpfes Aussehen. Klarspülerzugabemenge auf einen zu geringen Wert eingestellt. Tee oder Lippenstiftreste sind nicht vollständig entfernt. Der Reiniger hat eine zu geringe Bleichwirkung. Zu geringe Spültemperatur gewählt. Rostspuren am Besteck Besteck nicht ausreichend rostbeständig.
de Hinweise Hinweise für Vergleichsprüfungen Die Bedingungen für die Vergleichsprüfungen finden Sie auf dem Zusatzblatt “Hinweise für Vergleichsprüfungen”. Die Verbrauchswerte für die entsprechenden Programme sind in der Kurzanleitung dargestellt. Allgemeines Unterbau– und integrierte Geräte, die nachträglich als Standgerät aufgestellt werden, müssen gegen Umkippen gesichert werden, z.B.
de Frischwasseranschluss Demontage Frischwasseranschluss entsprechend der Montageanweisung mit Hilfe der beiliegenden Teile an den Wasserhahn anschließen. Achten Sie darauf, dass der Frischwasseranschluss nicht geknickt, gequetscht oder in sich verschlungen ist. Bei Austausch des Gerätes muß immer ein neuer Wasser–Zulaufschlauch für den Anschluß an die Wasserversorgung verwendet werden, der bisherige Zulaufschlauch darf nicht wiederverwendet werden.
de Entsorgung Hinweis zur Entsorgung Altgeräte sind kein wertloser Abfall! Durch umweltgerechte Entsorgung können wertvolle Rohstoffe wiedergewonnen werden. Bei ausgedienten Geräten Netzstecker ziehen. Netzkabel durchtrennen und mit dem Stecker entfernen. Türverschluss und Kindersicherung (falls vorhanden) zerstören. Sie verhindern damit, dass sich spielende Kinder einsperren und in Lebensgefahr kommen. Ihr neues Gerät wurde auf dem Weg zu Ihnen durch die Verpackung geschützt.
de Warnung Kinder könnten sich im Gerät einsperren (Erstickungsgefahr) oder in andere Gefahrensituationen geraten. Deshalb: Netzstecker ziehen, Netzkabel durchtrennen und beseitigen. Türschloss so weit zerstören, dass die Tür nicht mehr schließt. Dieses Gerät ist entsprechend der europäischen Richtlinie 2002/96/EG über Elektro– und Elektronikaltgeräte (waste electrical and electronic equipment – WEEE) gekennzeichnet.
de de 24 Änderungen vorbehalten
Kindersicherung * 40 41 42 Kindersicherung einschalten Tür öffnen mit eingeschalteter Kindersicherung Kindersicherung ausschalten Bei geöffneter Tür bietet die Kindersicherung keinen Schutz. Backblechsprühkopf * Große Bleche oder Gitter sowie Teller mit einem Durchmesser mehr als 30 cm (Gourmetteller, Pastateller, Platzteller) können Sie mit Hilfe dieses Sprühkopfes reinigen. Entnehmen Sie hierzu den Oberkorb und setzen Sie den Sprühkopf wie in der Zeichnung dargestellt ein.
de AQUA-STOP-Garantie &.4';,,4 #&* &2;4&. /).& 15" 4/0 !53;49,*$) 95 &7;)2,&*345.(3".302=$)&. (&(&. %&. &2+;5'&2 "53 %&- "5'6&242"( 5.% 953;49,*$) 95 5.3&2&2 &2;4&("2".4*& ,&*34&. 7*2 23"49 95 '/,(&.%&. &%*.(5.(&. /,,4& %52$) &*.&. &),&2 5.3&2&3 15" 4/0 834&-3 &*. "33&23$)"%&. 6&252> 3"$)4 7&2%&. 3/ &23&49&. 7*2 $);%&. 02*6"4&2 "5$)&2 *&3& "'45.(3("2".4*& (*,4 '=2 %*& &.3%"5&2 %&3 &2;43 /2"533&495.( %&3 "2".4*&".