Use and Care Manual
Table Of Contents
- Dishwasher
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Dishwasher Cycles
- 6 Options
- 7 Features
- 8 Before using for the first time
- 9 Water softening system
- 10 Rinse aid system
- 11 Detergent
- 12 Dishware
- 13 Basic Operation
- 13.1 Protection against unintentional operation
- 13.2 Switching on the appliance
- 13.3 Setting a cycle
- 13.4 Setting options
- 13.5 Setting the electronic delay time
- 13.6 Starting the wash cycle
- 13.7 Activating the button lock
- 13.8 Deactivating the button lock
- 13.9 Interrupting the wash cycle
- 13.10 Terminating the wash cycle
- 13.11 Switching off the appliance
- 14 Basic settings
- 15 Home Connect®
- 16 Cleaning and maintenance
- 17 Troubleshooting
- 18 Transportation, storage and disposal
- 19 Customer Service
- 20 Technical specifications
- 21 STATEMENT OF LIMITED PRODUCT WARRANTY
en-us HomeConnect®
34
15.3 Remote Start
You can use the HomeConnect®
app to start the appliance with
your mobile device.
Tip:If you select "rc2" in the Ba-
sic settings →
Page32
of this
function, the function is perma-
nently activated, and you can start
your appliance with a mobile de-
vice at any time.
Activating Remote Start
When you have selected "rc1" in
the basic settings of this function,
activate the function on your appli-
ance.
Requirements
¡ The appliance is connected to
your WLAN home network.
¡ The appliance is connected to
the HomeConnect® app.
¡ "rc1" is selected in the Basic
settings →
Page32
of this func-
tion.
¡ A program is selected.
▶ Press .
If you open the appliance door,
the function is automatically de-
activated.
a button lights up.
Tip:To deactivate the function,
press .
15.4 Remote Diagnostics
The Customer Service can access
your appliance via Remote Diag-
nostics if you ask them to do so, if
your appliance is connected to the
HomeConnect® server and if Re-
mote Diagnostics is available in
the country where you are using
the appliance.
Tip:Further information and de-
tails about the availability of Re-
mote Diagnostics in your country
can be found in the Service/Sup-
port section of your local website:
www.home-connect.com.
15.5 Software update
You can use this function to up-
date the software of your appli-
ance, e.g. for optimization, trou-
bleshooting or safety-relevant up-
dates.
The HomeConnect® app informs
you about available software up-
dates.
15.6 Data Protection
Please see the information on
data protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the
following types of data to the
HomeConnect® server (initial
registration):
¡ Unique appliance identification
(consisting of appliance codes
as well as the MAC address of
the installed Wi-Fi communica-
tion module).
¡ Security certificate of the Wi-Fi
communication module (to en-
sure a secure data connection).
¡ The current software and hard-
ware version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares
the HomeConnect® functions for
use and is only required when you
want to use the HomeConnect®
functions for the first time.
Note:Please note that the
HomeConnect® functions can be
utilized only with the HomeCon-
nect® app. Information on data
protection can be called up in the
HomeConnect® app.