Use and Care Manual

en-us Cleaning and maintenance
36
Phase Removal of Cleaner Placement
1 Grease and
limescale
Liquid machine care
product or machine
descaler in powder
form.
Appliance interior,
e.g. bottle hung in
the silverware bas-
ket or powder in the
interior.
2 Food remnants
and deposits
Machine cleaner Detergent dispenser
To ensure optimal cleaning perfor-
mance, the program doses the
cleaners independently of each
another during the relevant clean-
ing phase. Therefore, it's impor-
tant to place the cleaners cor-
rectly.
Run Machine Care without dish-
ware if the indicator for Machine
Care lights up on the control panel
or if advised to do so by the dis-
play. The indicator will go out after
you have run Machine Care
. If
your appliance does not have a
reminder function, we recommend
performing Machine Care every
2months.
RunMachine Care
Notes
¡ Run the Machine Care program
without any dishes in the dish-
washer.
¡ Only use machine care prod-
ucts and machine cleaners
specially designed for dish-
washers.
¡ Make sure that there are no
aluminum items, e.g. vent hood
grease filters or aluminum
pans, in the interior of the appli-
ance.
¡ If you have not run Machine
Care after 3 wash cycles, the
indicator for Machine Care
will
go out automatically.
¡ For optimal cleaning perfor-
mance, ensure the correct
placement of cleaners.
¡ Follow the safety instructions
given on the packagings of the
machine care products and ma-
chine cleaners.
1. Remove any heavy soiling in
the interior with a damp cloth.
2. Clean the filters.
3. Place the machine care product
in the appliance interior.
Only use machine care prod-
ucts specially designed for
dishwashers.
4. Pour the machine cleaner into
the detergent dispenser until it
is filled completely.
Do not place any additional ma-
chine cleaner in the appliance
interior.
5. Press Machine Care.
6. Press ⁠.
a Machine Care is run.
a Once the wash cycle has
ended, the indicator for Ma-
chine Care goes out.