Use and Care Manual
Table Of Contents
- Dishwasher
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Dishwasher Cycles
- 6 Options
- 7 Features
- 8 Before using for the first time
- 9 Water softening system
- 10 Rinse aid system
- 11 Detergent
- 12 Dishware
- 13 Basic Operation
- 13.1 Protection against unintentional operation
- 13.2 Switching on the appliance
- 13.3 Setting a cycle
- 13.4 Setting options
- 13.5 Setting the electronic delay time
- 13.6 Starting the wash cycle
- 13.7 Activating the button lock
- 13.8 Deactivating the button lock
- 13.9 Interrupting the wash cycle
- 13.10 Terminating the wash cycle
- 13.11 Switching off the appliance
- 14 Basic settings
- 15 Home Connect®
- 16 Cleaning and maintenance
- 17 Troubleshooting
- 18 Transportation, storage and disposal
- 19 Customer Service
- 20 Technical specifications
- 21 STATEMENT OF LIMITED PRODUCT WARRANTY
en-us Troubleshooting
40
Issue Cause and troubleshooting
E:32-00 lights up al-
ternately or indicator
for water supply
lights up.
7. Reinsert the filter in the supply hose.
8. Screw the water connection back on.
9. Check the water connection for leaks.
10. Restore the power supply.
11. Switch the appliance on.
E:34-00 lights up al-
ternately.
Water is continuously running into the appliance.
1. Turn off the water faucet.
2.
Call customer service →
Page53
.
E:61-02 lights up al-
ternately.
Not an appliance error. The drain pump cover is
loose or a foreign object is blocking the pump.
▶ Secure the cover of the drain pump so it clicks
into place or clean the drain pump.
E:61-03 lights up al-
ternately. Water is
not draining.
Not an appliance error. Garbage disposal is still
plugged or the drain hose is kinked.
▶ Check that the garbage disposal plug is re-
moved and that the drain hose is not kinked.
Not an appliance error. The drain pump cover is
loose or a foreign object is blocking the pump.
▶ Secure the cover of the drain pump so it clicks
into place or clean the drain pump.
Not an appliance error. High loop is missing and/
or debris flushed back into drain hose and
blocked it.
▶ Be sure there is a high loop in the drain hose
and that no debris has flushed back into the
hose.