Installation instructions
11
Attach 90° elbow joint to dishwasher
oriented as shown. Do not over-
tighten.
• After locating the proper place for your dishwasher, create required
openings in your cabinets in order to allow for water, drain and
electrical lines on the appropriate side.
• The holes should be cut within the 7 x 2.5" area shown.
• If the opening is made through wood, sand it smooth.
• If the opening is made through metal, use the Edge Protector with
Power Cord clips Kit SMZEPCC1UC.
7"
(177.8 mm)
3