Installation instructions

• Flip unit back upright, making sure the waterline is not pinched.

• Orient the drain hose toward direction of sink.

IMPORTANT: Route hose toward sink PRIOR TO connection. Do not turn

after attachment. Attach drain hose elbow (Part G) to back of unit using pli-

ers to install the spring clamp (Part B).

• Pre-level unit before positioning under counter by turning feet clockwise

to raise or counter-clockwise to lower. Maximum height the unit can be

raised with feet fully extended is 34.5" (876.3 mm).

• Position unit under counter to verify that it is level. If adjustment is needed,

remove unit from under counter and adjust as necessary.

• Once the unit is at a satisfactory height, insert leg leveler locking screw

(Part D) in back foot. Step 10 will complete the leveling process.