Technical data

(586 mm'
1/4" max.
(6mm)
Figure 20.
Door Tension Adjustment
After installation of the dishwasher open and close the
door several times. The door should open and close
easily with very little force required to lift the door
when fully open. If the door closes too quickly, or if the
door falls open, the spring tension should be adjusted.
To adjust the spring tension obtain the screw in Figure
21 out of the parts bag. Insert the screw as shown in
Figure 21 and adjust spring tension as shown.
SHU 9900 Handle Assembly
The SHU 9900 model has a handle that needs to be
assembled onto the door panel. Reference installation kit
and instructions provided with the handle.
Final check list
CHECK ELECTRICAL REQUIREMENTS.
BE SURE YOU HAVE CORRECT ELECTRICAL
SUPPLY AND RECOMMENDED GROUNDING
METHOD.
Turn on the hot water shut-off valve and electrical
supply. Water temperature should be 140°F (60°C).
Operate the dishwasher through one cycle and check for
plumbing leaks.
If the dishwasher does not operate refer to the SELF-
HELP and the SERVICE and REPAIR sections in the
Use and Care Manual.
LEAVE INSTALLATION INSTRUCTIONS AND
USE & CARE MANUAL WITH OWNER.
lTorxT20].
Figure 21.
10