Technical data

Panel Installation, SHV Models
If you have an SHV model, a fully integrated model,
you will have additional mounting hardware and a folded
template sheet with installation instructions comprised
of pictograms.
Refer to the folded template sheet for information on
how to mount the panel. Please note that one side of the
template shows how to mount a one piece panel and the
other side of the template shows how to mount a two
piece panel. Be sure of what type installation you want
before proceeding with the installation.
Refer to Figure 19 and Table 2 for guidelines on custom
door panel selections.
Figure 18.
"B"
Model
SHI
6802
SHI
6806
SHI
4302
SHI
4306
SHI
6805
Table 1.
Extension "A"
maxJmin.
Standard Long
13/16" / 0"
(21 / 0 mm) - -
13116" / 0"
(21 / 0 mm) - - -
13/16" / 0"
(21 / 0 ram) -- -
13116" / 0"
(21 / 0 ram) - - -
11116"15116" 1-118"111116"
(18/8 ram) (29/18 mm)
5-5/16"
(135ram)
5-5/16"
(135mm)
5-5116"
(135ram)
5-5/16"
(135mm)
5-5/16"
(135ram)
maxdmin
6-1/8" / 5-5/16"
(156 / 135 mm
6-1/8" / 5-5116"
(156/135 mm
6-1/8" / 5-5/16"
(156 / 135 mm
6-118" / 5-5116"
(156 / 135 mm
6-7116" / 5-5/8"
(164 / 143 mm
After deciding if the extension pieces will be used or not
refer to the pictograms printed on the template for
proper method of mounting your custom door.
Refer to Figure 19 and Table 2 for guidelines on custom
door panel selection.
Note: Do NOT Drill Completely through your custom
door panel.
D E
Figure 19.
Model D * E F
SI-IV NA 27-3116" - 30-5116" 23-3116" - 23-3/8"
(690 - 770 mm) (589 - 594 mm)
SHI 20-11/16" - 25" 27-3/16" - 30-5/16" 23-3/16" - 23-3/8"
(526 - 635 mm) (690 - 770 mm) (589 - 594 mrn)
Table 2.
*Note: Do not exceed 30 5/16 (770mm) for the overall
front panel length.
Accessory Panel Installation, SHU Models
If you have an SHU model (other than the SHU 9900
models) and have ordered an accessory panel kit it must
be installed prior to sliding the dishwasher into place.
Dimensions of panel size that may be used is shown in
Figure 20.