Installation Guide
Table Of Contents
- Dishwasher
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Before you begin
- 3 Installation Preparation
- 4 Installation Procedure
- 4.1 Attach Vapor Barrier
- 4.2 Attach Water Inlet Hose
- 4.3 Visual Leak Check
- 4.4 Pre-level the Dishwasher
- 4.5 Attach Power Cord
- 4.6 Mounting Brackets
- 4.7 Prepare Hoses and Power Cord
- 4.8 Install Dishwasher in Cabinet Space
- 4.9 Level the Dishwasher
- 4.10 Outer Door Assembly
- 4.11 Secure the Dishwasher
- 4.12 Attach the Standard Toe Panel
- 4.13 Attach Plastic Toe Panel
- 5 Dishwasher Connection
- 6 Customer Service
- fr-ca
- Table des matières
- 1 IMPORTANTES CONSIGNES DE SÉCURITÉ
- 2 Avant de commencer
- 3 Préparation avant l’installation
- 4 Procédure d’installation
- 4.1 Attacher le pare-vapeur
- 4.2 Fixer le flexible d’arrivée d’eau
- 4.3 Contrôle visuel des fuites
- 4.4 Mise à niveau préalable du lave-vaisselle
- 4.5 Fixer le cordon d’alimentation
- 4.6 Équerres de fixation
- 4.7 Préparer les tuyaux et le cordon d’alimentation
- 4.8 Installer un lave-vaisselle dans un meuble
- 4.9 Mise à niveau du lave-vaisselle
- 4.10 Assemblage de la porte extérieure
- 4.11 Fixer le lave-vaisselle
- 4.12 Fixer la plinthe standard
- 4.13 Fixer la plinthe en plastique
- 5 Raccordement du lave-vaisselle
- 6 Service à la clientèle
- es-mx
- Tabla de contenidos
- 1 INSTRUCCIONES DE SEGURIDAD IMPORTANTES
- 2 Antes de empezar
- 3 Preparación para la instalación
- 4 Procedimiento de instalación
- 4.1 Acoplar barrera de vapor
- 4.2 Acoplar la manguera de entrada de agua
- 4.3 Comprobación visual de fugas
- 4.4 Nivelar provisionalmente el lavavajillas
- 4.5 Acoplar el cable de alimentación
- 4.6 Soportes de montaje
- 4.7 Preparar las mangueras y el cable de alimentación
- 4.8 Instalar el lavavajillas en el espacio del gabinete
- 4.9 Nivelar el lavavajillas
- 4.10 Montaje de la puerta exterior
- 4.11 Fijar el lavavajillas
- 4.12 Acoplar la placa protectora del zócalo estándar
- 4.13 Acoplar la placa protectora del zócalo de plástico
- 5 Conexión del lavavajillas
- 6 Servicio de atención al cliente
Installation Procedure en-us
11
2. Slip bracket flange through side slots in frame.
3. Using pliers, bend side flanges. Do not attach to cabinet
yet.
4.7 Prepare Hoses and Power Cord
The dishwasher drain hose is configured for a sink on the
left side of the installation location. If your sink is on the
right side, you will need to reposition the drain hose
behind the dishwasher before installing.
1. If needed, unhook the strap and reposition the drain
hose per your requirements.(If your sink is to the left
side, leave the hose as it came.)
2. Position the drain hose, water inlet hose and the power
cord so they all run through the strap on the appropriate
side.
3. Attach the strap back in place to secure the hoses and
cord.
4.8 Install Dishwasher in Cabinet Space
To avoid scratching the floor, use floor protection and
caution when sliding the dishwasher into the cabinet.
NOTICE:
Avoid Hose Kinks
▶ Be careful while pushing dishwasher in. The hoses can
fold, kink or break, potentially causing an obstruction or
leak.