Installation instructions

• You may use the piece you removed in Step 7 to attach to the inside of

the adjacent cabinet and hang the drain hose from as shown (screws

are not supplied) in place of using a Nonmetallic Tie as pictured in the

next illustrations. Do not exceed 43” in drain hose height.

• The dishwasher drain hose must be installed with a portion of it at

least 33” (84 cm) o the floor; otherwise the dishwasher may not drain

properly.

max. 43” (110 cm)

screws

not

provided

Drain Connection

IMPORTANT NOTES about your drain connection:

• If local ordinance require an air gap, install it according to the

manufacturer’s instructions.

• If the dishwasher drain hose is to be connected to a disposer

dishwasher drain connection, remove the plug from the disposer’s

dishwasher drain connection.

• The dishwasher drain hose must have one place along its length that is

securely attached 33″ (84 cm) above the floor.

• The drain hose length can be extended if necessary. Use kit

#SGZ1010UC. The maximum length of the drain hose, including the

hose leading to the air gap, is 150″ (380 cm).

Scan here for video instructions on

the drain connection