Installation Guide

Place adhesive backed cord clip (provided in the installation kit) 5" (127 mm)
from leg adjuster as shown in the gure above and route power cord through
the clip.
Note: The length of cord measured from the plastic back strap to the receptacle
should be ≤ 47.25" (1,200 mm).
Route supply cord through strap and plug the end of the supply cord into
the back of the dishwasher as shown until it clicks.
Note: Ensure plug is fully seated.
Mount the dishwasher electrical supply junction box (A) and dedicated
receptacle in an accessible cabinet adjacent to the dishwasher (do not mount
the junction box or receptacle behind the dishwasher).
Note: Screws are not provided for mounting electrical supply junction box.
CLICK
Adhesive
backed
cord clip
Leg Adjuster
Strap
5"
(127 mm
)
C
l
ip
o
rie
ntation
A
lternate cable routing
11
10
A
13
Route supply cord through opening into dishwasher cabinet.