Installation Guide
Electrical Supply Cable - Minimum #14 AWG, 2 conductor,
1 ground, insulated copper conductors rated 75°C or higher
Only needed if house electrical line is not adequate.
Hot Water Supply Line - Minimum
3
/8″ O.D. copper tubing
or metal braided dishwasher supply line
Only needed if house water supply line is not sufcient.
Shut-off valve and ttings appropriate for hot water supply
line (copper tubing/compression tting, or braided hose)
UL listed conduit connector or strain relief is required if you
attach the eld wiring directly to the terminal block
Tools and Materials Needed
Adjustable Wrench
Tape Measure
Wire Cutter
Needle Nose Pliers
Pliers
Slot Screwdriver
Level
Wire Stripper
Drill
Hole Saw
Phillips Screwdriver
4