Manual
Operating the Dishwasher en-us
39
Terminating the wash cycle
(Reset)
Ter minating the wa s h cycl e
1.
Press and hold Start button P
for approximately 3 seconds until
the display reads ‹:‹‚.
2.
Wait about 1 minute while the
dishwasher drains.
3.
Press On/Off button (.
You may now power the dishwasher
back on and begin a new cycle if
desired.
Changing the wash cycle
When the Start button ( has been
pressed, the wash cycle cannot be
changed. The only way a wash cycle
can be changed is by terminating the
wash cycle (Reset).
InfoLight
®
*
While the wash cycle is running, a
light spot shines on the floor under
the appliance door.
Do not open the appliance door until
the light point is no longer visible on
the floor.
If the appliance door is not
completely closed, the light spot
flashes*.
If the appliance is installed at
eye-level, with flush furniture front, the
light point is not visible.
In darkened rooms, some light
scattering may be visible. This is
normal and cannot be changed.
You can switch the Infolight on or off.
To change the setting:
1.
Open the door.
2.
Press the On/Off button (.
3.
Hold down function key # and
press Start button P until the
display 8 indicates š:‹x (x can
be any number). Release both
buttons.
4.
Press function key # until the
display shows ‚:‹‚.
5.
Press the function key 3 to
switch the InfoLight
®
feature on
‚:‹‚ or off ‚:‹‹.
6.
Press Start button P to save
the setting.
* optional feature which may or may
not be included with your
dishwasher.
‚:‹‹ Off
‚:‹‚ On