Installation Manual

16
2 1/8“
55mm
3 1/2“
85mm
x2
a
2 1/8“
55mm
3 1/2“
85mm
x2
b
8
• Place adhesive backed cord clips (provided in the installation kit) as
shown in the figure above and route power cord through the clips.
Use method a or b depending on which side your power outlet is on.
Note:The length of cord measured from the plastic back strap to the
receptacle should be ≤ 47.25” (1,200 mm).
• Plug the end of the supply cord securely into the back of the
dishwasher.
• The outlet for the power supply cord should be located in a cabinet
or wall adjacent to the dishwasher cabinet. Do not plug dishwasher in
until all the steps of installation are complete.
Note: Only use the included power cord. If cord is missing order kit
SMZPC002UC through Customer Service.