Operation Manual

Operating the appliance en
29
Here’s how to change the setting:
1. Switch on ON/OFF switch (.
2. Hold down the programme button
# and then hold the START button
` until :... appears in the
display window h.
3. Release both buttons.
The illuminated display on the button
# flashes.
4. Press the programme button #
repeatedly until :... appears in the
display window h. (for the optical
display) together with the previously
set value, for example :‹‚.
5. Press the programme button 3
repeatedly until the desired value, for
example :‹‹, appears in the
display window h.
6. Press START button `.
The set value is saved.
infoLight (optical display while
a programme is running) *
infoLight
* depending on the configuration of
your specific dishwasher
While a programme is running, a light
spot is projected onto the floor at the
bottom of the dishwasher door. Do not
open the dishwasher door until the light
spot is no longer visible on the floor. If
the door is not properly closed the light
spot will flash.* If the appliance is
installed at eye-level flush with the
furniture, this display will not be visible.
Here’s how to change the setting:
1. Switch on ON/OFF switch (.
2. Hold down the programme button
# and then repeatedly press the
START button ` until :....
appears in the display window.
3. Release both buttons.
The LED of the # button flashes
and the display window h lights
up to show the value :...
4. Press the programme button #
repeatedly until the factory setting
value :‹‚ appears in the display
window h.
5. Press the 3 button to switch the
function on :‹‹ or off :‹‚.
6. Press START button `.
The set value is saved.
Remaining running time
display
When the programme is selected, the
remaining programme time is indicated
in the display window h.
*After the programme has started, the
remaining running time is displayed on
the floor (only for settings Timelight
:‹‚ and :‹ƒ).
The running time is determined during
the programme by the water
temperature, the quantity of dishes as
well as the degree of soiling and may
vary (depending on the selected
programme).
* depending on the features of your
dishwasher