Specifications

Solution 16 i
6
Bosch Security Systems 09/07 BLCC500R FTR1.02
Quick Start Guide
Copyright © 2007 E&OE
In sta lli ng Panels and Mo dul es
Once the enclosure is secured in place, install the panels
and modules onto the mounting clip using the supplied
3mm screws. Do not over tighten the screws.
When fitting panels or large modules, you should use 5
mounting clips, one in each corner of the PCB and one in
the middle of the PCB underneath the main terminal blocks.
When mounting small modules, only 4 clips are required, 1
in each corner.
Both enclosures are supplied with tamper switches,
tamper leads, tamper brackets and a quantity of
mounting clips and screws. If required, additional mounting
clips and screws may be purchased in bags of 50 clips (10
packs x 5pcs). (P/N: MW890)
i
Note
The supplied mounting clips are designed to use the
3mm machine screws supplied with the enclosure.
The use of self tapping screws will damage the
clips.
320 mm
260 mm
 



 





 










Figure 3: MW700 - Small Enclosure Details
Figure 4: PCB Mounting Clip
The following example shows the MW700 -Small enclosure
configured using 4 small modules.


















�













Figure 5: MW700 Configuration Examples
The following example shows the MW700 -Small enclosure
configured using 2 small modules and 1 large module.