User guide

15
Bosch Security Systems 09/06 BLCC100U
Solution16
Plus
User Guide
keypads programmed to sound the chime tone will be heard
when a zone programmed for chime is faulted.
The master user can Set Chime Zones on page 16. This allows
the master user to program which zones can be monitored for
chime.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [2] + [0] + [5].
A list of different areas will display on the keypad.
A001 Reception Area 
A002 Sales Dept
A003 Administration Dept
Press  OK or MENU
2. Use the [
↑] and [↓] keys to select the area that you want
to turn chime mode on or off, then press [OK] to select.
Alternatively, you can enter the area number that you
want to turn chime mode on or off, then press [OK].
The keypad will display the following when chime mode
is turned off:
Reception Area A001
Chime Is OFF,
To Turn ON, Press ON.
To Go Back Press OK
The keypad will display the following when chime mode
is turned on:
Reception Area A001
Chime Is ON,
To Turn OFF, Press OFF.
To Go Back Press OK
3. Press the [ON] key to turn chime mode on, or, press [OFF]
to turn chime mode off.
4. Press the [OK] key to exit.
Areas > Area Properties >
Area Name
MENU 2-1-0
This menu allows you to program the name for each area. Each
area name can be programmed with up to 16 characters. At factory
default, only Area 1 is used. The Solution 16
Plus
control panel can
have a maximum of 4 independent areas programmed.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [2] + [1] + [0].
A list of different areas will display on the keypad.
2. Use the [
↑] and [↓] keys to select the area that you
want to program the name, then press [OK] to select.
Alternatively, you can enter the area number that you
want to program the name, then press [OK].
The keypad will display the following:
Area Name A001
Area 1 Name
Press ◄► OK to SAVE
3. Use the [
←] and [→] keys to scroll the cursor left and
right across the area name text. Use the [↑] and [↓] keys
to scroll through the different characters available. To
clear all text from the cursor position to the right, press
the [OFF] key.
4. When the user name is complete, press [OK].
Inputs
Each Solution 16
Plus
control panel has up to a maximum 16 zones.
When the optional radio receiver is fitted any available zone may
be programmed as a wireless zone. Your installer will advise you
on the exact makeup and configuration of your system.
Inputs > Commands >
Zone Status
MENU 3-0-0
This menu allows you to view the zone status of each zone (i.e.
Normal, Open or Short).
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [3] + [0] + [0].
A list of different zones will display on the keypad.
2. Use the [
↑] and [↓] keys to select the zone that you want
to turn view the status information then press [OK] to
select. Alternatively, you can enter the zone number that
you want to view status information, then press [OK].
The keypad will display the following zone status
information:
Zone 1 Name Z001
EOL=Normal 06523 ohms
Press OK or MENU
3. Press the [OK] key to exit.