User Manual
Table Of Contents
- Dishwasher
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Dishwasher Cycles
- 6 Options
- 7 Features
- 8 Before using for the first time
- 9 Rinse aid system
- 10 Detergent
- 11 Dishware
- 12 Basic Operation
- 12.1 Protection against unintentional operation
- 12.2 Switching on the appliance
- 12.3 Setting a cycle
- 12.4 Setting options
- 12.5 Setting the electronic delay time
- 12.6 Starting the wash cycle
- 12.7 Activating the button lock
- 12.8 Deactivating the button lock
- 12.9 Interrupting the wash cycle
- 12.10 Terminating the wash cycle
- 12.11 Switching off the appliance
- 13 Basic settings
- 14 Home Connect™
- 15 Cleaning and maintenance
- 16 Troubleshooting
- 17 Transportation, storage and disposal
- 18 Customer service
- 19 Technical specifications
- 20 Statement of Limited Product Warranty
Basic Operation en-us
27
12.8 Deactivating the
button lock
▶
Press for approx. 3sec-
onds.
12.9 Interrupting the wash
cycle
1. Press On/Off.
The program is saved and the
appliance switches off.
2. Press On/Off.
3. Press to resume the wash
cycle.
12.10 Terminating the
wash cycle
To end a cycle early or to switch
from one that has already started,
you will need to cancel it first.
▶
Press for approx.
4seconds.
a All displays light up.
a As soon as the displays are off,
the display shows "0h:01m"
and the residual water is
pumped out.
a The cycle is cancelled and
ends after approx. 1minute.
12.11 Switching off the
appliance
CAUTION
To avoid risk of injury, always use
caution when opening the door
during or following a wash cycle
as hot water or steam may es-
cape.
▶
Do not fully open the door until
water noises have stopped and
steam has subsided.
1. Please note the information on
Preventing Material Damage
→
Page9
.
2. Press On/Off.