Use and Care Guide

Basic Operation en-us
27
the door has to be closed within 4
seconds, otherwise the operation
will be paused.
Note:This function cannot be de-
activated.
Requirements
¡ Pressing Start to begin a wash
cycle
¡ Setting Delay time and press-
ing Start
¡ Opening the door while Delay
time is active
¡ Opening the door during a
wash cycle.
1. Press ⁠.
2. Close the door.
a The wash cycle will resume.
12.2 Opening the
appliance door
▶
Open the appliance door.
12.3 Switching on the
appliance
▶
Press ⁠.
The standard program is set by
default.
If you do not perform any ac-
tions on the appliance for 10
minutes, it will automatically
switch off.
12.4 Setting a cycle
To adjust the wash cycle to the
soiling level of the dishware, se-
lect a suitable cycle.
▶
Press the right cycle button.
a The cycle is set and the cycle
button flashes.
a The remaining run time of the
cycle appears on the display.
12.5 Setting options
You can set options to complete
the chosen cycle.
Note:The available options de-
pend on which cycle is selected.
▶
Press the button for the rele-
vant option.
a The option is set and the option
button flashes.
12.6 Setting the electronic
delay time
You can delay the start of the
wash cycle by up to 24hours.
1. Press ⁠.
a "h:01" appears on the display.
2. Use to set the required
start time for the wash cycle.
3. Press ⁠.
a This activates the electronic de-
lay time.
Tip:To deactivate the electronic
delay time, press repeatedly
until "h:00" appears on the dis-
play.
12.7 Starting the wash
cycle
▶
Press .
a The wash cycle has ended
when the display shows
"0h:00m".
Notes
¡ If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.
¡ You can only change a cycle in
progress if you can cancel it
first.
→ "Terminating the wash cy-
cle", Page28