Sensixx B35L Operating instructions
Index General safety instructions Page 4 1 Description 6 2 Preparations 7 3 Setting the temperature 8 4 Ironing with steam 8 5 “PulseSteam” function 8 6 Ironing without steam 9 7 Vertical steam 9 8 “Intelligent steam” function 9 9 Energy saving “eco” setting 9 10 Auto shut-off 9 11 Fabric protection soleplate cover 10 12 Calc’n’Clean 10 13 Automatic clean warning 11 14 Rinsing the iron steam chamber 11 15 Cleaning & Maintenance 12 16 Storing the appliance 12 17 Tips to hel
Thank you for buying the Sensixx B35L steam station, the new steamironing system from Bosch. Please visit www.bosch-home.co.uk for more product information or to register your product, just follow the link to the Online guarantee registration. Introduction These instructions for use contain valuable information about the unique features of this system and some hints to make ironing easier for you. We hope that you enjoy ironing with this steam station.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
1 Description 1. Water tank 2. Removable iron pad 3. Steam hose 4. “Steam ready” / “Auto shut-off*” pilot light 5. Variable steam control* 6. “Refill water tank” / “Clean warning*” pilot light* 7. “on / off” pilot light * 8. Main power button (0/I) 9. Housing with internal steam generator 10. Mains cable with storage facility 11. Temperature selector 12. Steam release button 13. Steam shot button “Ultimate”* 14. Iron indicator lamp 15. Soleplate 16.
2 Preparations 1. Remove any label or protective covering from the soleplate. 2. Place the appliance horizontally on a solid, stable surface. You may remove the iron pad from the appliance and place the iron on it on another solid, stable, horizontal surface. 3. Fill the water tank, making sure not to pass the MAX level mark. 4. Unwind the mains cable (10) fully and plug it into an earthed socket. 5. Set the main power button (8) to the on position (illuminated in red)*. 6.
3 Setting the temperature 1. Check the ironing instruction label on the garment to determine the correct ironing temperature. 2. Turn the temperature selector (11) to the required setting: • Synthetics •• Silk – Wool ••• Cotton – Linen 3. The indicator lamp (14) will remain lit while the iron is heating and go out as soon as the iron has reached the selected temperature.
When the steam release button is activated, the steam generator will release three powerful shots of steam so that the steam reaches even deeper into the fabrics. 1. Set the temperature selector (11) on “•••” 2. Briefly press the steam shot button (13*) on the top of the handle. or (model dependent) Press the steam release button (12) on the bottom of the handle two times in quick succession (double-click). Remarks: • It is possible to stop the shots of steam by quickly pressing the steam button again.
11 Fabric protection soleplate cover (model dependent) The fabric-protection soleplate cover (16*) is used for steam-ironing delicate garments at maximum temperature without damaging them. Use of the soleplate cover also does away with the need for a cloth to prevent shine on dark materials. It is advisable to first iron a small section on the inside of the garment to see if it is suitable.
13 Automatic clean warning (model dependent) Pilot light (7*) will flash indicating that boiler must be rinsed. To reset the “Calc’n’Clean” counter, switch the steam station off twice, keeping it off for at least 30 seconds each time. (on → 30s off → on → 30s off → on) 14 that might be there. This could take approximately 5 minutes. i) Set the temperature selector (11) of the iron to the “max” position, without pressing the steam release button (12-13*).
15 Cleaning & Maintenance Attention! Risk of burns! Always unplug the appliance from the mains supply before carrying out any cleaning or maintenance operation on it. 1. After ironing, pull out the plug and allow the appliance to cool down before cleaning. 2. Wipe the housing, handle and iron body with a damp cotton cloth. 3. If the soleplate is soiled with dirt or scale, clean it with a damp cotton cloth. 4.
18 Advice on disposal 19 Our goods come in optimised packaging. This basically consists in using non-contaminating materials which should be handed over to the local waste disposal service as secondary raw materials. Your local town council can give you information about how to dispose of obsolete appliances. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE).
Problem The iron begins to smoke when switched on. Possible causes Solution • During first use: certain • This is completely normal and components on the will stop after a short while. appliance have been lightly greased at the factory and may produce a little smoke when initially heated. • During subsequent use: • Clean the soleplate according the soleplate may be to the cleaning instructions in soiled. this manual.
Problem Possible causes Solution The soleplate turns brown. • This is a regular • Clean the soleplate with a consequence of continued damp cloth. use over a long period of time. The appliance makes a pumping sound. • Water is being pumped • This is normal. into the steam tank. • The water tank is not fitted • Fit the water tank back onto onto the housing correctly. the housing correctly (you will • The sound will not stop. hear a click).
Customer Service Great Britain Bosch Customer Service Grand Union House Old Wolverton Road Milton Keynes MK12 5PT UK +44 (0)844 892 8979 IRL +353 (0)1450 2655 www.bosch-home.co.
