User Manual

21
TES506.. | 01/2014
en
Problem Cause Solution
Thewaterlterdoesnotstay
inpositioninthewatertank
(17).
Thewaterlterisnot
mountedcorrectly.
Firmlypressthewaterlter
straightdownintothetank
connection.
Display shows
Check
water tank
Watertankhasbeen
incorrectlyinsertedorthe
newwaterlterhasnot
beenrinsedaccordingto
instructions.
Insertthewatertankcorrectly
orrinsethewaterlteraccord-
ingtoinstructionsandthen
switchon.
Carbonatedwaterinthe
watertank.
Fillthewatertankwithfresh
tapwater.
Thecoffeegroundsarenot
compactandaretoowet.
Thegrindingsettingistoo
neortoocoarse,ornot
enough ground coffee has
beenused.
Adjustthegrindingunittoa
coarserornersetting,oruse
2levelmeasuringspoonsof
groundcoffee.
Display shows
Clean brewing unit
Brewingunit(5)issoiled. Cleanbrewingunit(5).
Toomuchpre-groundcoffee
inthebrewingunit(5).
Cleanbrewingunit(5).Pourin
nomorethan2levelmeasur-
ingspoonsofgroundcoffee.
Thebrewingunit’s
mechanismisstiff.
Removeandclean
thebrewingunit,see
“Maintenanceand
dailycleaning”.
Coffeeormilkfrothquality
variesconsiderably.
Build-upoflimescaleinthe
appliance.
Descaletheapplianceas
describedintheinstructions.
Waterdrippedontothe
innerooroftheappliance
whenthedriptray(8)was
removed.
Driptray(8)removedtoo
early.
Waitafewsecondsafter
thelastdrinkwasdispensed
beforeremovingthedriptray
(8).
Display shows
Insert brewing unit
Brewingunit(5)ismissing
orwasnotrecognised.
Switchofftheappliancewith
thebrewingunit(5)inplace,
waitthreesecondsandswitch
ontheappliance.
Restoretheunittoitsoriginal
factorysettings(“Reset”).
Youchangedsomesettings
andwanttodiscardthem.
Turnofftheunitwiththepower
on/offswitchO / I(9).Press
andholdthe
e off / j(13)and
theh / g(12)buttonand
turntheapplianceonwiththe
poweron/offswitchO / I(9).
Conrmbypressingthestart
buttonstart(10).Thefactory
settingsarenowactivated.
If you are unable to solve the problem, always call the hotline!
You will nd the telephone numbers at the back of these instructions.