KBE and KBN Series Prepackaged Cameras en Instruction Manual
KBE and KBN Series Table of Contents | en iii Table of Contents 1 Safety 1 1.1 Important Safety Instructions 1 1.2 Safety Precautions 4 1.3 Important Notices 5 1.4 Customer Support and Service 13 2 Unpacking 15 2.1 Parts List 15 3 Description 15 3.1 Model Summary 15 4 Installation 16 4.1 Operating Voltage 16 4.2 Preparing the Unit 16 4.3 Preparing the Mount 16 4.4 Housing 16 4.5 Line Power and Video Signal Connection 16 4.
iv en | Table of Contents F01U078718 | 2.0 | 2008.01 KBE and KBN Series Instruction Manual Bosch Security Systems, Inc.
KBE and KBN Series Safety | en 1 Safety 1.1 Important Safety Instructions 1 Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist flufffree cloth or leather shammy may also be used.
2 en | Safety KBE and KBN Series the unit from lightning and power line surges. 7. Controls adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure. 8. Overloading - Do not overload outlets and extension cords. This can cause fire or electrical shock. 9.
KBE and KBN Series Safety | en 3 supply at the terminals or at the unit's power supply terminals. – If unsure of the type of power supply to use, contact your dealer or local power company. 12. Servicing - Do not attempt to service this unit yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 13.
4 en | Safety 1.2 KBE and KBN Series Safety Precautions DANGER! High Risk: ! This symbol indicates an imminently hazardous situation such as “Dangerous Voltage” inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. ! WARNING! Medium Risk: Indicates a potentially hazardous situation. If not avoided, this could result in serious bodily injury or death. CAUTION! Medium Risk: ! Indicates a potentially hazardous situation.
KBE and KBN Series 1.3 Safety | en 5 Important Notices Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury and/or serious damage to the unit. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use caution and care when moving the cart/apparatus combination to avoid injury from tip-over.
6 en | Safety KBE and KBN Series Coax grounding: – Ground the cable system if connecting an outside cable – Connect outdoor equipment to the unit's inputs only after system to the unit. this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source. – Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal.
KBE and KBN Series Safety | en 7 NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostaticsensitive printed circuit boards. Fuse rating - For security protection of the device, the branch circuit protection must be secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60).
8 en | Safety KBE and KBN Series Power lines - Do not locate the camera near overhead power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights. SELV All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should only be connected to other SELV circuits. Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the SELV circuit to the Telephone Network Voltage (TNV) circuits.
KBE and KBN Series Safety | en 9 FCC & ICES INFORMATION This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: – this device may not cause harmful interference, and – this device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada.
10 en | Safety KBE and KBN Series INFORMATIONS FCC ET ICES Ce produit est conforme aux normes FCC partie 15. la mise en service est soumises aux deux conditions suivantes: – cet appareil ne peut pas provoquer d'interférence nuisible – cet appareil doit pouvoir tolérer toutes les interférences et auxquelles il est soumit, y compris les interférences qui pourraient influer sur son bon fonctionnement.
KBE and KBN Series Safety | en 11 Disclaimer Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UP’s Standard(s) for Safety for Closed Circuit Television Equipment, UL 2044. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.
12 en | Safety KBE and KBN Series NOTICE! This user guide has been compiled with great care and the information it contains has been thoroughly verified. The text i was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice.
KBE and KBN Series 1.4 Safety | en 13 Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers USA Telephone: 800-366-2283 or 585-340-4162 Fax: 800-366-1329 Email: cctv.repair@us.bosch.com Customer Service Telephone: 888-289-0096 Fax: 585-223-9180 Email: security.sales@us.bosch.com Technical Support Telephone: 800-326-1450 Fax: 585-223-3508 or 717-735-6560 Email: technical.
14 en | Safety F01U078718 | 2.0 | 2008.01 KBE and KBN Series Instruction Manual Bosch Security Systems, Inc.
KBE and KBN Series 2 Unpacking | en 15 Unpacking This electronic equipment should be unpacked and handled carefully. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative.
16 en | Installation 4 Installation ! 4.1 KBE and KBN Series WARNING! This installation should be made by a qualified service person and conform to all local codes. Operating Voltage All Recommended operating voltage is 24 VAC, 60 Hz. 4.2 Preparing the Unit Remove the mount and the housing assembly from the carton. 4.3 Preparing the Mount Prepare and secure the mount to the wall or mounting surface as described in the LTC 9215/00 Installation Manual included in the Instruction Booklet Packet. 4.
KBE and KBN Series 4.6 Installation | en 17 Connections for U Suffix, F Suffix, and N Suffix The connections for models containing fiber optic, network, or twisted pair interfaces are covered as follows: 4.6.1 U (Twisted Pair) Suffix Connections These models include an unshielded twisted pair transmitter added to the standard construction. 1. Make all power connections in accordance with the KBE and KBN Series Instruction Manual. 2.
18 en | Installation 5. KBE and KBN Series Seal the hole in the mounting foot of the camera housing with RTV or an equivalent seal. If a fitting was used in the mounting foot, apply the seal around the UTP cable before tightening the fitting to prevent slippage. 6. Attach the housing to the mount in accordance with the KBE and KBN Series Instruction Manual. 4.6.2 Wiring Do’s 1. Use point to point unshielded twisted pair wire, 24 AWG or thicker, stranded or solid, Category 2, 3, 4, or 5. 2.
KBE and KBN Series Installation | en 19 than 1000 ft. (304.8 m), or Category 5 cable up to 609.6 m (2000 ft). 6. For safety, never put signals in the same conduit as high voltage wiring. 4.6.4 F (Fiber Optic) Suffix Connections These models include a fiber optic transmitter added to the standard construction. 1. Make all power connections in accordance with the KBE and KBN Series Instruction Manual. 2.
20 en | Installation KBE and KBN Series Figure 4.3 Pull the Fiber Optic Cable Reference 1 2 3 4. Description Orange string ST/RJ-45 connector Fiber optic video cable/UTP/CAT5 cable Connect the fiber optic cable to the fiber optic video connector on the fiber optic transmitter. ! CAUTION! Make sure that the bend radius of the fiber optic cable is in accordance with the cable manufacturer’s specifications when dressing the fiber optic cable. Figure 4.
KBE and KBN Series Installation | en 21 Reference Description 1 Fiber optic cable 2 Video connector on fiber optic transmitter 5. If an unterminated fiber optic cable is being used, a fitting may be used in the mounting foot of the camera housing. The fiber optic cable should be terminated with an ST connector in accordance with the connector manufacturer’s recommendations. 6. Seal the hole in the mounting foot of the camera housing with RTV or an equivalent seal.
22 en | Installation 4.6.5 KBE and KBN Series N (Network) Suffix Connections These models include an IP-based camera that enables network video and configuration capabilities. 1. Make all power connections in accordance with the KBE and KBN Series Instruction Manual. ! CAUTION! Never supply power via the Ethernet connection (PoE) when power is supplied via the power connector. 2. Connect the camera to a 10/100 Base-T network (Figure 4.6). 3.
KBE and KBN Series Installation | en Figure 4.7 23 Power Wire Connection Reference Description 1 Power terminal 5. Pass the supplied orange string through the mounting foot of the camera housing and the furnished mount. See Figure 4.2. A fitting may be used in the mounting foot if desired. 6. Attach the end of the string to the Cat5/Cat6 cable and pull it through the mount and the unused hole in the mounting foot of the camera housing. See Figure 4.3. 7.
24 en | Camera Lens Adjustment 5 KBE and KBN Series Camera Lens Adjustment The camera and lens come factory configured and ready for operation. If custom setup is required, see the camera Installation Instructions included in the Instruction Booklet Packet. Figure 5.1 6 Removing the Bracket Sunshield A sunshield is provided with the outdoor packages. F01U078718 | 2.0 | 2008.01 Instruction Manual Bosch Security Systems, Inc.
KBE and KBN Series 7 Sunshield | en 25 Model Numbers and System Specifications Model No. Camera Lens Housing Mount Res. Lens System MONOCHROME 1/3 in. STANDARD RESOLUTION KBNLTC LTC LTC LTC 380 2.8-10 mm Indoor, 335V28-20 0335/20 3364/50 9480/00 9215/00S Vari-focal Monochrome EIA, 24 VAC, 60 Hz KBELTC LTC UHOLTC 380 2.
26 en | Sunshield KBE and KBN Series Model No. KBN385V55-20 Camera Lens Housing Mount Res.
KBE and KBN Series Sunshield | en Model No. KBN435V55-20 Camera Lens Housing Mount Res. Lens LTC LTC LTC LTC 330 5-50 mm 0435/20 3374/50 9480/00 9215/00S Vari-focal KBE435V55-20 LTC LTC UHOLTC 0435/20 3374/50 HBGS-10 9215/00 System Indoor, Color NTSC, 24 VAC, 60 Hz Outdoor, Color NTSC, 24 VAC, 60 Hz 330 5-50 mm Vari-focal 27 1/3 in. HIGH RESOLUTION KBNLTC LTC LTC LTC 540 2.8-10 mm Indoor, Color 455V28-20 0455/21 3364/50 9480/00 9215/00S Vari-focal NTSC, 24 VAC, 60 Hz KBELTC LTC UHOLTC 540 2.
28 en | Sunshield Model No. Camera Lens KBE and KBN Series Housing Mount 1/2 in. HIGH RESOLUTION, HIGH SENSITIVITY KBELTC LTC UHOLTC 610V75-20 0610/21 3274/41 HBGS-10 9215/00 Res. Lens 540 7.
KBE and KBN Series Sunshield | en Model No. Camera Lens Housing Mount KBELTC LTC UHOLTC 495V75-20U 0495/21 3674/20 HBGS-10 9215/00 DAY/NIGHT 1/2 in.
30 en | Sunshield F01U078718 | 2.0 | 2008.01 KBE and KBN Series Instruction Manual Bosch Security Systems, Inc.
Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 USA Telephone +1 888.289.0096 Fax +1 717.735.6565 www.bosch-securitysystems.com © 2007 Bosch Security Systems, Inc., F01U078718 | 2.0 | 2008.01 Data subject to change.
