Instruction manual

KBE and KBN Series Installation | en 21
Bosch Security Systems, Inc. Instruction Manual F01U078718 | 2.0 | 2008.01
5. If an unterminated fiber optic cable is being used, a fitting
may be used in the mounting foot of the camera housing.
The fiber optic cable should be terminated with an ST
connector in accordance with the connector
manufacturer’s recommendations.
6. Seal the hole in the mounting foot of the camera housing
with RTV or an equivalent seal. If a fitting was used in the
mounting foot along with an unterminated fiber optic
cable, apply the seal around the optical cable before
tightening the fitting, to prevent slippage. A split rubber
sleeve (not supplied) may be used for this purpose.
Figure 4.5 Seal the Hole in the Housing Foot
7. Attach the housing to the mount in accordance with the
KBE and KBN Series Instruction Manual.
Reference Description
1 Fiber optic cable
2 Video connector on fiber optic transmitter
Reference Description
1Seal with RTV